TECH-PROTECT GLASS UV+ 2-PACK REALME 14 PRO 5G CLE

Tech-Protetect Glass UV is a premium tempered glass that will provide exceptional protection for your device's screen. Thanks to UV application technology, the glass perfectly adheres to the surface, eliminating bubbles and ensuring full transparency and touch sensitivity.

The hardness of 9H effectively protects the screen from scratches, bumps and other mechanical damage, and the special UV light-cured adhesive guarantees a perfect fit and stability, even on curved screens.

The glass provides full coverage of the screen, edge-to-edge, without affecting image quality or color reproduction, and its smooth surface preserves full touchscreen responsiveness.

Tech-Protetect Glass UV is the ideal solution for those looking for reliable screen protection while maintaining the aesthetics and functionality of their device.

* We do not recommend using 3D glass without any case.
** We do not recommend using the glass if the case overlaps the edges of the screen too much, there is a risk of undermining.
*** The functionality of the fingerprint reader in the screen may be slightly affected if a film or glass coating is installed. The fingerprint reader is not fully refined for additional coatings.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and you will not be disturbed by the installation.
2) Clean thoroughly and degrease the surface of the screen, then use a dry cloth to polish it to a shine.
3) Use the ribbon from the kit to seal the speaker.
4) Connect the UV lamp using the Type-C cable to the power source.
5) Pour the liquid on the very center of the device.
6) Install the glass as evenly as you can, this step can also be corrected before the surface cures when the liquid is on the screen along with the glass.
7) If an air bubble has appeared, use an ATM card and gently push it out of the glass, this step is done before curing.
8) Using a UV lamp, cure the glass along the center in five places for 15 seconds each and then around the edges for 10 seconds each.
9) Clean the phone of any residual cured glue.
10) If your device has a fingerprint reader in the screen, be sure to remove and re-add the fingerprint after installing the screen glass.
11) Enjoy a job well done!

PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Tempered glass with a thickness of 0.3mm
- 9H scratch resistance
- Equipped with oleophobic coating
- Leaves no trace after removal
- Dimensions: 159 x 73 mm

KIT INCLUDES:
2 x Tech-Protetect UV Glass
1 x UV lamp (without Type-C cable)
2 x Tube with adhesive
2 x Installation kit