| Switch type | Unmanaged |
| Switch layer | L2 |
| Quality of Service (QoS) support | Y |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Gigabit Ethernet (copper) ports quantity | 5 |
| Networking standards | IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x |
| 10G support | N |
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
| Full duplex | Y |
| Half duplex | Y |
| Flow control support | Y |
| Auto MDI/MDI-X | Y |
| Head-of-line (HOL) blocking | Y |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| MAC address table | 2048 entries |
| Switching capacity | 10 Gbit/s |
| Forwarding rate | 7.4 Mpps |
| Number of queues | 4 |
| Jumbo frames support | Y |
| Jumbo frames | 9216 |
| Queue scheduling algorithms | Weighted Round Robin (WRR) |
| Rack mounting | Y |
| Form factor | 1U |
| Product colour | Grey |
| LED indicators | Y |
| Certification | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B |
| Mean time between failures (MTBF) | 4243002 h |
| Power supply included | Y |
| Redundant power supply (RPS) support | N |
| Number of power supply units | 1 |
| DC input voltage | 12 V |
| Power over Ethernet (PoE) | N |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage relative humidity (H-H) | 5 - 90% |
| Heat dissipation | 9.34 BTU/h |
| Width | 110 mm |
| Depth | 75 mm |
| Height | 30 mm |
| Weight | 230 g |
| Quick start guide | Y |
| Description |
| Cisco CBS110. Switch type: Unmanaged, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 5. Full duplex. MAC address table: 2048 entries, Switching capacity: 10 Gbit/s. Networking standards: IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x. DC input voltage: 12 V. Rack mounting, Form factor: 1U |