Valoda

Mans Konts

Iepirkumu grozs

Filters

Personal menu

Valoda

Meklēt

Iepriekšējais produktsAnyCubic AnyCubic Standand ...

Nākamais produktsAnycubic Kobra 3 V2 3D prin...

Ražotājs: ANYCUBIC

AnyCubic AnyCubic Tough Resin 2.0 (Grey)

€38,27 ar pvn

Artikuls: ST08339334

Preces kods: SRX2GY-101A

Ražotāja mājaslapa

Garantija: 12 mēneši

Pieejamība *

Noliktava	Piegāde	Daudzums	Cena
	3 - 6 dienās	72	€38,27 ar pvn
LV	2 - 5 dienās	72	€40,97 ar pvn
PL	8 - 15 dienās	72	€50,13 ar pvn

Daudzums:

Specifikācijas

Specifikācija

UV wavelength: Density: Viscosity: Hardness: Tensile strength: Extension at fracture: Shrinkage at forming: Bending strength: Modulus of elasticity at bending: Heat distortion resistance temperature: Exposure time for bottom layer: Standard exposure time: Resin cleaning: Shelf life: Color

Recommended Printing Parameters for Various Models of Anycubic 3D Printers (Photon Mono M3 Pro, Photon Mono 6K, Photon Ultra, etc.):

Layer thickness: Exposure time: No-exposure time: Exposure time of lower layers: Number of lower layers: Anti-aliasing: Z Lift distance: Z Lift speed: Z Retract Speed:

Download:

Safety data sheet

Description
Description	AnyCubic Tough Resin 2.0 (Gray) AnyCubic resin is a unique plastic that exhibits increased strength. It is relatively flexible and resistant to cracking, making it possible to print miniature components and thin models as well. What's more, finished models made with this resin are less likely to be damaged, even after falling from heights. Tough Resin 2.0 was created with environmentally friendly ingredients that do not irritate or emit intense odors. It is compatible with most LCD 3D printers. The perfect choice for perfectionists Tough Resin 2.0 is perfect for prints that require more precision. It is suitable for printing in the wavelength range of 365nm to 405nm, allowing you to achieve optimal results. The resin also exhibits less shrinkage. As a result, your models are full of detail and their surface is perfectly finished - especially when used in conjunction with AnyCubic printers. Physical and Chemical Properties:
365-405 nm
1.10-1.15 g/cm³
450-500 cPimPa-s
82-84D
30-42 MPa
60-72%
5.1-6.2%
42-52 MPa
1500-2000 MPa
50-55°C
20-40s
1.5-3s (for color screens 8s)
Alcohol
1.5 years
Gray
0.05 mm
1.5s to 3.6s
1s
20s to 35s
5-6
1
5mm to 10mm
2mm/s to 6mm/s
2mm/s do 6mm/s

Specifikācija

Recommended Printing Parameters for Various Models of Anycubic 3D Printers (Photon Mono M3 Pro, Photon Mono 6K, Photon Ultra, etc.):

Layer thickness: Exposure time: No-exposure time: Exposure time of lower layers: Number of lower layers: Anti-aliasing: Z Lift distance: Z Lift speed: Z Retract Speed:

Download:

Safety data sheet

Description
Description	AnyCubic Tough Resin 2.0 (Gray) AnyCubic resin is a unique plastic that exhibits increased strength. It is relatively flexible and resistant to cracking, making it possible to print miniature components and thin models as well. What's more, finished models made with this resin are less likely to be damaged, even after falling from heights. Tough Resin 2.0 was created with environmentally friendly ingredients that do not irritate or emit intense odors. It is compatible with most LCD 3D printers. The perfect choice for perfectionists Tough Resin 2.0 is perfect for prints that require more precision. It is suitable for printing in the wavelength range of 365nm to 405nm, allowing you to achieve optimal results. The resin also exhibits less shrinkage. As a result, your models are full of detail and their surface is perfectly finished - especially when used in conjunction with AnyCubic printers. Physical and Chemical Properties:
365-405 nm
1.10-1.15 g/cm³
450-500 cPimPa-s
82-84D
30-42 MPa
60-72%
5.1-6.2%
42-52 MPa
1500-2000 MPa
50-55°C
20-40s
1.5-3s (for color screens 8s)
Alcohol
1.5 years
Gray
0.05 mm
1.5s to 3.6s
1s
20s to 35s
5-6
1
5mm to 10mm
2mm/s to 6mm/s
2mm/s do 6mm/s