Close
Izvēlne
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Menu
    Iepirkumu grozs
    Filters
    Valoda
    Meklēt
    • /
    • LaserPecker smoke absorber for LX2
    Ražotājs: LASERPECKER

    LaserPecker smoke absorber for LX2


    €810,13 ar pvn

    Artikuls: ST10358364
    Preces kods: LX2-SP
    Ražotāja mājaslapa
    Garantija: 12 mēneši
    *
    Noliktava Piegāde Daudzums Cena
    PL

    Specifikācija
    Description
    LaserPecker smoke extractor for LX2 The LaserPecker smoke extractor for LX2 has been designed for maximum comfort during laser engraving and cutting. It effectively eliminates smoke, odors, and microscopic contaminants, creating a safe and friendly environment even during long sessions. This solution significantly improves the quality of work, protecting your health and allowing you to fully focus on the precision of your project. Three-stage filtration An advanced three-stage filtration system with a HEPA filter and activated carbon is responsible for its exceptional effectiveness. The absorber removes up to 99.97% of fine particles up to 0.3 microns in size, effectively capturing dust and volatile contaminants generated during laser operation. This keeps the air in your workshop noticeably cleaner and fresher. Higher performance and longer service life The large 420 × 250 × 410 mm filter provides more intensive cleaning and a longer service life without the need for frequent replacement. The increased capacity translates into stable performance even with demanding materials, which will be appreciated by both professionals and hobbyists. Quiet operation for better concentration The LaserPecker smoke absorber for the LX2 operates extremely discreetly, keeping noise levels below 61 dB. This means it does not distract or disrupt your work, allowing for comfortable use in the office, workshop, or home studio. Smart control and compatibility Built-in smart features notify you when the filter needs to be replaced and allow you to set a timer for automatic shutdown, increasing convenience and safety. The device is designed exclusively for use with the LaserPecker LX2 engraver, ensuring a perfect fit and seamless integration with the entire system.   Manufacturer LaserPecker Model LX2-SP Compatibility LaserPecker LX2 Filtration system three-stage Filter type HEPA filter + activated carbon filter Filtration efficiency 99.97% Size of captured particles up to 0.3 microns Filter dimensions 420 × 250 × 410 mm Noise level during operation below 61 dB Additional features timer support

    Specifikācija
    Description
    LaserPecker smoke extractor for LX2 The LaserPecker smoke extractor for LX2 has been designed for maximum comfort during laser engraving and cutting. It effectively eliminates smoke, odors, and microscopic contaminants, creating a safe and friendly environment even during long sessions. This solution significantly improves the quality of work, protecting your health and allowing you to fully focus on the precision of your project. Three-stage filtration An advanced three-stage filtration system with a HEPA filter and activated carbon is responsible for its exceptional effectiveness. The absorber removes up to 99.97% of fine particles up to 0.3 microns in size, effectively capturing dust and volatile contaminants generated during laser operation. This keeps the air in your workshop noticeably cleaner and fresher. Higher performance and longer service life The large 420 × 250 × 410 mm filter provides more intensive cleaning and a longer service life without the need for frequent replacement. The increased capacity translates into stable performance even with demanding materials, which will be appreciated by both professionals and hobbyists. Quiet operation for better concentration The LaserPecker smoke absorber for the LX2 operates extremely discreetly, keeping noise levels below 61 dB. This means it does not distract or disrupt your work, allowing for comfortable use in the office, workshop, or home studio. Smart control and compatibility Built-in smart features notify you when the filter needs to be replaced and allow you to set a timer for automatic shutdown, increasing convenience and safety. The device is designed exclusively for use with the LaserPecker LX2 engraver, ensuring a perfect fit and seamless integration with the entire system.   Manufacturer LaserPecker Model LX2-SP Compatibility LaserPecker LX2 Filtration system three-stage Filter type HEPA filter + activated carbon filter Filtration efficiency 99.97% Size of captured particles up to 0.3 microns Filter dimensions 420 × 250 × 410 mm Noise level during operation below 61 dB Additional features timer support
    Nesen skatītās preces
    Informācija
    Klientu serviss
    Mans profils
    Sazinies ar mums
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Mūsu partneri
    Autortiesības © 2026 Tera.lv. Visas tiesības aizsargātas.