Close
Izvēlne
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Menu
    Iepirkumu grozs
    Filters
    Valoda
    Meklēt
    • /
    • xTool SafetyPro AP2 Max Air Purifier
    Ražotājs: XTOOL

    xTool SafetyPro AP2 Max Air Purifier


    €2577,94 ar pvn

    Artikuls: ST10279770
    Preces kods: P0101000132
    Ražotāja mājaslapa
    Garantija: 24 mēneši
    *
    Noliktava Piegāde Daudzums Cena
    EU
    PL
    PL

    Specifikācija
    Description
    xTool SafetyPro™ AP2 Max Smoke Absorber The xTool SafetyPro™ AP2 Max is an industrial smoke absorber designed for users of professional laser engravers and cutters. The device ensures maximum air purity by eliminating smoke, odors and toxic substances right at the source. With a huge capacity of 700 m³/h and an advanced seven-layer filtration system, the product creates a safe and comfortable working environment even when used for long hours. Seven layers of complete protection The SafetyPro™ AP2 Max uses a seven-layer filtration system that removes both large particles and microscopic fines and harmful gases from the air. The SuperCyclone filter captures 99% of particles over 5 μm in diameter and protects subsequent layers from clogging. Pre-filter and medium efficiency filters eliminate dust, fibers and up to 95% of PM2.5 fine dust, while two carbon layers - activated carbon and ultra-dense carbon mesh - neutralize volatile organic compounds and 99.99% of odors. A formaldehyde filter breaks down toxic HCHO into water and carbon dioxide, reducing its concentration. The final barrier is the HEPA filter, which traps 99.97% of particles, allergens and viruses as small as 0.3 micrometers. SuperCyclone - longer filter life, lower costs The innovative SuperCyclone system makes the entire filtration process more efficient and cost-effective. It is reusable and its design prevents clogging of successive layers. This extends the life of the pre-filter by up to ten times, which means less frequent replacement, less material consumption and lower operating costs. Quiet, efficient operation and precise control The 900-watt motor generates a stable airflow with a noise level of only about 65 dB, which helps maintain acoustic comfort in the workshop or workshop. In addition, the airflow regulation from 1 to 100% allows you to perfectly adjust the operation of the device to the current conditions and the type of material being processed.   Manufacturer xTool Name SafetyPro™ AP2 Max Model P0101000132 Airflow capacity 700 m³/h Filtration system 7-layer Number of cyclones 72 Airflow adjustment range 1-100% (precise control) Noise level 65 dB Power Up to 900 W Dimensions 662 x 452 x 845 mm Compatibility xTool P3, MetalFab and all other xTool laser engravers

    Specifikācija
    Description
    xTool SafetyPro™ AP2 Max Smoke Absorber The xTool SafetyPro™ AP2 Max is an industrial smoke absorber designed for users of professional laser engravers and cutters. The device ensures maximum air purity by eliminating smoke, odors and toxic substances right at the source. With a huge capacity of 700 m³/h and an advanced seven-layer filtration system, the product creates a safe and comfortable working environment even when used for long hours. Seven layers of complete protection The SafetyPro™ AP2 Max uses a seven-layer filtration system that removes both large particles and microscopic fines and harmful gases from the air. The SuperCyclone filter captures 99% of particles over 5 μm in diameter and protects subsequent layers from clogging. Pre-filter and medium efficiency filters eliminate dust, fibers and up to 95% of PM2.5 fine dust, while two carbon layers - activated carbon and ultra-dense carbon mesh - neutralize volatile organic compounds and 99.99% of odors. A formaldehyde filter breaks down toxic HCHO into water and carbon dioxide, reducing its concentration. The final barrier is the HEPA filter, which traps 99.97% of particles, allergens and viruses as small as 0.3 micrometers. SuperCyclone - longer filter life, lower costs The innovative SuperCyclone system makes the entire filtration process more efficient and cost-effective. It is reusable and its design prevents clogging of successive layers. This extends the life of the pre-filter by up to ten times, which means less frequent replacement, less material consumption and lower operating costs. Quiet, efficient operation and precise control The 900-watt motor generates a stable airflow with a noise level of only about 65 dB, which helps maintain acoustic comfort in the workshop or workshop. In addition, the airflow regulation from 1 to 100% allows you to perfectly adjust the operation of the device to the current conditions and the type of material being processed.   Manufacturer xTool Name SafetyPro™ AP2 Max Model P0101000132 Airflow capacity 700 m³/h Filtration system 7-layer Number of cyclones 72 Airflow adjustment range 1-100% (precise control) Noise level 65 dB Power Up to 900 W Dimensions 662 x 452 x 845 mm Compatibility xTool P3, MetalFab and all other xTool laser engravers
    Nesen skatītās preces
    Informācija
    Klientu serviss
    Mans profils
    Sazinies ar mums
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Mūsu partneri
    Autortiesības © 2026 Tera.lv. Visas tiesības aizsargātas.