Flexible and easy way to manage your switch
The XGS1930 can be used in two modes by utilizing Zyxel's NebulaFlex. You are able to easily change between standalone and our license free Nebula cloud management platform, anytime, with a few simple clicks. You can easily access advanced features such as VLAN, Quality of Service (QoS), IGMP Snooping, Link Aggregation (LAG) wether you choose intuitive web-based GUI or cloud-based Nebula management platform.
The XGS1930 enables cloud manageability with Zyxel's NebulaFlex to protect your investment by having the flexibility to benefit from the cloud in your own time, without the need to worry about additional ongoing licensing costs. You can grasp your network device status and perform remote configuraitons anytime, anywhere.
A new and flexible approach to 10G!
Under the new stylish carbon-like cover comes new hardware and software to widen the user experience for our new series of 10G switches. The XGS1930’s flexible approach includes the introduction of NebulaFlex, giving you the ability to configure the switch without unboxing. The XGS1930 also includes intuitive new features like the One-touch ‘Restore’ button on the front panel.
What to benefit from Central management?
The XGS1930 series of switches are able to join our License Free Cloud management platform, Nebula. Simply register your switch via the portal (Nebula Control Center) and the device will automatically join, auto provision and begin to give you real-time control and information, anywhere, anytime.
Not ready for the cloud… Just yet?
Not ready for the cloud? No problem the XGS1930 series offers traditional standalone (Smart Managed) configuration via it’s intuitive local web based setup, whilst always giving you the flexibility to centrally control via Nebula when you are ready without any additional fees.
An affordable approach to 10G, the backbone of any network.
The XGS1930 series has been designed to suite a wide range of scenarios that SMBs are often faced with. Feature rich, flexible management options and 10G uplinks, all make the XGS1930 series the first choice for SMBs looking for an upgrade path from 1G, future proofing or have requirements for higher bandwidths across their backbone.
More available power with intelligent PoE support.
The XGS1930 series offers 30-watt (802.2at) PoE+ to each port and gives a large PoE+ budget of 375w on all PoE models. The PoE is further enhanced with intelligent PoE (Smart Power), allowing the switch to deliver the actual power required to devices connected without wasting power often lost in the PoE allocation process. This approach can see the switch support more PoE devices on a single switch compared to traditional smart managed switches, even power-hungry devices like CCTV and Wireless Access Points.
Experience whisper-silent operation.
The XGS1930 series has been designed with smart fan technology to automatically adjust speeds round the temperature of the device. This allows the switch to minimize the acoustic noise and create a whisper-silent operation in typical deployments.
| | Switch type | Managed | | Switch layer | L3 | | Quality of Service (QoS) support | Y | | Web-based management | Y | | Basic switching RJ-45 Ethernet ports quantity | 24 | | Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) | | SFP+ module slots quantity | 4 | | Fiber optic connector | SFP+ | | Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z | | 10G support | Y | | Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T | | Port mirroring | Y | | IP routing | Y | | Routing entries | 32 | | Flow control support | Y | | Link aggregation | Y | | Broadcast storm control | Y | | Spanning tree protocol | Y | | VLAN support | Y | | Virtual LAN features | Voice VLAN, Port-based VLAN | | Number of VLANs | 4000 | | MAC address table | 16000 entries | | Switching capacity | 128 Gbit/s | | Forwarding rate | 95.2 Mpps | | Static route | Y | | Path MTU discovery | Y | | Packet buffer memory | 1.5 MB | | DHCP features | DHCP relay, DHCPv6 relay, DHCP client | | Access Control List (ACL) | Y | | IGMP snooping | Y | | Security algorithms | 802.1x RADIUS, HTTPS, SHA-2, SNMPv3, SSL/TLS | | SSH/SSL support | Y | | Loop protection | Y | | Authentication | Guest VLAN, MAC-based authentication, Port-based authentication | | Password protection | Y | | CPU defense | Y | | Multicast support | Y | | GARP VLAN Registration Protocol (GVRP) | Y | | Rack mounting | Y | | Product colour | Black | | Safety | LVD, BSMI | | Electromagnetic compatibility | FCC 15 A, CE A, BSMI EMC | | Certification | RoHS | | Internal memory | 512 MB | | Flash memory | 32 MB | | Mean time between failures (MTBF) | 1211024 h | | AC input voltage | 100 - 240 V | | AC input frequency | 50 - 60 Hz | | Power consumption (max) | 24.6 W | | Power over Ethernet (PoE) | N | | Operating temperature (T-T) | 0 - 50 °C | | Storage temperature (T-T) | -40 - 70 °C | | Operating relative humidity (H-H) | 10 - 95% | | Storage relative humidity (H-H) | 10 - 95% | | Heat dissipation | 83.886 BTU/h | | Width | 441 mm | | Depth | 270 mm | | Height | 44 mm | | Weight | 3.4 kg | | Cables included | AC | | Rack mount kit | Y | | Package width | 616 mm | | Package depth | 355 mm | | Package height | 107 mm | | Package weight | 4.47 kg | | Harmonized System (HS) code | 85176990 |
|
|
