Close
Izvēlne
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Menu
    Iepirkumu grozs
    Filters
    Valoda
    Meklēt
    Ražotājs: NONAME

    Spectrum Analyzer


    €334,44 ar pvn

    Artikuls: ST10391811
    Preces kods: TV991211
    Ražotāja mājaslapa
    *
    Noliktava Piegāde Daudzums Cena
    LT

    Specifikācija
    Description
    Specifications:ruUser interface:uDisplay resolution 320*20 piels.Screen diagonal 2.8".16 its per RGB piels.Resistive touch control.Jog switch control.USB serial port control.Optional TTL USART port (SW not yet implemented) on the internal PCB.Linear power supply to avoid switching noise. rThe inputoutput specification of the tinySA is split over the modes.ruLow input mode spec:uInput frequency range from 100kHz to 350MHz (with some limitations down to 10kHz).Input impedance 50 ohm when input attenuation set to 10dB or more.Selectale manual and automatic input attenuation etween 0dB and 31dB in 1 dB steps.Asolute maimum input level of +10dBm with 0dB internal attenuation.Asolute maimum short term peak input power of +20dBm with 30dB internal attenuation.Suggested maimum input power of +5dBm with internal attenuation in automatic mode.For est measurements keep input power elow -25dBm.Input Intercept Point of third order modulation products (IIP3) of +15dBm with 0dB internal attenuation.1dB compression point at -1dBm with 0dB internal attenuation.Power detector resolution of 0.5dB and linearity versus frequency of +-1dB.Asolute power level accuracy after power level caliration of +- 1dB.Lowest discernile signal using a resolution andwidth of 30kHz of -102dBm.Frequency accuracy equal to the selected resolution andwidth.Phase noise of -90dBHz at 100kHz offset and -115dBHz at 1MHz offset.Spur free dynamic range when using a 30kHz resolution andwidth of 70dB.Manually selectale resolution filters of 3, 10, 30, 100, 300, 600kHz. Automatic selection of one of the 57 resolution filters.On screen resolution of 51, 101, 15 or 290 measurement points.Scanning speed of over 1000 pointssecond using largest resolution filters.Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution andwidth.Spur suppression option for assessing if certain signals are internally generated or actually present in the input signal.After a small HW modification it is possile to Listen to the demodulated audio.ruHigh input mode spec:uInput frequency range from 20MHz to 960MHz.Input impedance is frequency dependent and deviates from 50 ohm.As there is no input and filter, strong input signals outside the 20MHz to 960MHz range can cause distortion of the in and signals.Asolute maimum input level without attenuation of +10dBm.Input Intercept Point of third order modulation products (IIP3) of -5dBm with no internal attenuation.1dB compression point at -6dBm with no internal attenuation.Power detector resolution of 0.5dB and linearity versus frequency of +-1dB.Asolute power level accuracy after power level caliration of +- 1dB.Lowest discernile signal using a resolution andwidth of 30kHz of -115dBm.Frequency accuracy equal to the selected resolution andwidth.Spur free dynamic range when using a 30kHz resolution andwidth of 50dB.Manually selectale resolution filters of 3, 10, 30, 100, 300, 600kHz. Automatic selection of one of the 57 resolution filters.Optional 25dB to 0dB frequency dependent input attenuator. The power level error with this attenuator activated increases to +- 10dB.On screen resolution of 51, 101, 15 or 290 measurement points.Scanning speed of over 1000 pointssecond using largest resolution filters.Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution andwidth.After a small HW modification it is possile to Listen to the demodulated audio. ruLow output mode spec:uSinus output with harmonics elow -0dB of fundamental.Output frequency range from 100kHz to 350MHz.Level accuracy +- 2dB over the whole output frequency range.Output frequency resolution either 156Hz elow 7MHz output or 312Hz aove 7MHz output.Output level selectale in 1dB steps etween -76dBm and -6dBm.Optional AM, narrow FM and wide FM modulation with frequencies etween 50Hz and 6kHz or slow sweep over selectale frequency span.Optional output level sweep over maimum the entire output level range.r uHigh output mode spec:uSquare wave output.Output frequency range from 20MHz to 960MHz.Output frequency resolution either 156Hz elow 80MHz output or 312Hz aove 80MHz output.Output level selectale in variale increments etween -38dBm and +9dBm.Optional narrow FM and wide FM modulation with frequencies etween 50Hz and 6kHz or slow sweep over selectale frequency span.ruReference generator spec:uOptional square wave output with fundamental at -25dBm connected to high inputoutput.Frequency can e set to 1MHz, 2MHz, MHz, 10MHz, 15MHz or 30MHz. ruBattery spec:uCharging time ma 1 hour on 500mA minimum USB port or USB charger.Operation on fully charged attery for at least 2 hours.rWarranty: 2 months.

    Specifikācija
    Description
    Specifications:ruUser interface:uDisplay resolution 320*20 piels.Screen diagonal 2.8".16 its per RGB piels.Resistive touch control.Jog switch control.USB serial port control.Optional TTL USART port (SW not yet implemented) on the internal PCB.Linear power supply to avoid switching noise. rThe inputoutput specification of the tinySA is split over the modes.ruLow input mode spec:uInput frequency range from 100kHz to 350MHz (with some limitations down to 10kHz).Input impedance 50 ohm when input attenuation set to 10dB or more.Selectale manual and automatic input attenuation etween 0dB and 31dB in 1 dB steps.Asolute maimum input level of +10dBm with 0dB internal attenuation.Asolute maimum short term peak input power of +20dBm with 30dB internal attenuation.Suggested maimum input power of +5dBm with internal attenuation in automatic mode.For est measurements keep input power elow -25dBm.Input Intercept Point of third order modulation products (IIP3) of +15dBm with 0dB internal attenuation.1dB compression point at -1dBm with 0dB internal attenuation.Power detector resolution of 0.5dB and linearity versus frequency of +-1dB.Asolute power level accuracy after power level caliration of +- 1dB.Lowest discernile signal using a resolution andwidth of 30kHz of -102dBm.Frequency accuracy equal to the selected resolution andwidth.Phase noise of -90dBHz at 100kHz offset and -115dBHz at 1MHz offset.Spur free dynamic range when using a 30kHz resolution andwidth of 70dB.Manually selectale resolution filters of 3, 10, 30, 100, 300, 600kHz. Automatic selection of one of the 57 resolution filters.On screen resolution of 51, 101, 15 or 290 measurement points.Scanning speed of over 1000 pointssecond using largest resolution filters.Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution andwidth.Spur suppression option for assessing if certain signals are internally generated or actually present in the input signal.After a small HW modification it is possile to Listen to the demodulated audio.ruHigh input mode spec:uInput frequency range from 20MHz to 960MHz.Input impedance is frequency dependent and deviates from 50 ohm.As there is no input and filter, strong input signals outside the 20MHz to 960MHz range can cause distortion of the in and signals.Asolute maimum input level without attenuation of +10dBm.Input Intercept Point of third order modulation products (IIP3) of -5dBm with no internal attenuation.1dB compression point at -6dBm with no internal attenuation.Power detector resolution of 0.5dB and linearity versus frequency of +-1dB.Asolute power level accuracy after power level caliration of +- 1dB.Lowest discernile signal using a resolution andwidth of 30kHz of -115dBm.Frequency accuracy equal to the selected resolution andwidth.Spur free dynamic range when using a 30kHz resolution andwidth of 50dB.Manually selectale resolution filters of 3, 10, 30, 100, 300, 600kHz. Automatic selection of one of the 57 resolution filters.Optional 25dB to 0dB frequency dependent input attenuator. The power level error with this attenuator activated increases to +- 10dB.On screen resolution of 51, 101, 15 or 290 measurement points.Scanning speed of over 1000 pointssecond using largest resolution filters.Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution andwidth.After a small HW modification it is possile to Listen to the demodulated audio. ruLow output mode spec:uSinus output with harmonics elow -0dB of fundamental.Output frequency range from 100kHz to 350MHz.Level accuracy +- 2dB over the whole output frequency range.Output frequency resolution either 156Hz elow 7MHz output or 312Hz aove 7MHz output.Output level selectale in 1dB steps etween -76dBm and -6dBm.Optional AM, narrow FM and wide FM modulation with frequencies etween 50Hz and 6kHz or slow sweep over selectale frequency span.Optional output level sweep over maimum the entire output level range.r uHigh output mode spec:uSquare wave output.Output frequency range from 20MHz to 960MHz.Output frequency resolution either 156Hz elow 80MHz output or 312Hz aove 80MHz output.Output level selectale in variale increments etween -38dBm and +9dBm.Optional narrow FM and wide FM modulation with frequencies etween 50Hz and 6kHz or slow sweep over selectale frequency span.ruReference generator spec:uOptional square wave output with fundamental at -25dBm connected to high inputoutput.Frequency can e set to 1MHz, 2MHz, MHz, 10MHz, 15MHz or 30MHz. ruBattery spec:uCharging time ma 1 hour on 500mA minimum USB port or USB charger.Operation on fully charged attery for at least 2 hours.rWarranty: 2 months.
    Nesen skatītās preces
    Informācija
    Klientu serviss
    Mans profils
    Sazinies ar mums
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Mūsu partneri
    Autortiesības © 2026 Tera.lv. Visas tiesības aizsargātas.