Close
Izvēlne
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Menu
    Iepirkumu grozs
    Filters
    Valoda
    Meklēt
    • /
    • Anycubic Szybkowymienny hotend Anycubic z dysz 0,8 mm do Kobra 3 Max
    Ražotājs: ANYCUBIC

    Anycubic Szybkowymienny hotend Anycubic z dysz 0,8 mm do Kobra 3 Max


    €20,64 ar pvn

    Artikuls: ST10359987
    Preces kods: S010366
    Ražotāja mājaslapa
    Garantija: 12 mēneši
    *
    Noliktava Piegāde Daudzums Cena
    PL
    PL

    Specifikācija
    ManufacturerCompatibilityDiameterNozzle Material
    Description

    Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max

    The Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max is a practical solution for those who want to get back to printing quickly without the hassle of replacing parts. Thanks to its ready-to-use design with a factory-installed 0.8 mm steel nozzle, you can count on smooth installation and stable operation, which translates to fewer downtimes and more consistent results. The larger nozzle diameter allows for faster printing and better handling of materials requiring higher flow rates, while the use of steel increases wear resistance, extending the lifespan of the entire hotend.

    Anycubic
    Kobra 3 Max
    0.8 mm
    Stainless Steel
    Description
    Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max The Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max is a practical solution for those who want to get back to printing quickly without the hassle of replacing parts. Thanks to its ready-to-use design with a factory-installed 0.8 mm steel nozzle, you can count on smooth installation and stable operation, which translates to fewer downtimes and more consistent results. The larger nozzle diameter allows for faster printing and better handling of materials requiring higher flow rates, while the use of steel increases wear resistance, extending the lifespan of the entire hotend.   Manufacturer Anycubic Compatibility Kobra 3 Max Diameter 0.8 mm Nozzle Material Stainless Steel

    Specifikācija
    ManufacturerCompatibilityDiameterNozzle Material
    Description

    Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max

    The Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max is a practical solution for those who want to get back to printing quickly without the hassle of replacing parts. Thanks to its ready-to-use design with a factory-installed 0.8 mm steel nozzle, you can count on smooth installation and stable operation, which translates to fewer downtimes and more consistent results. The larger nozzle diameter allows for faster printing and better handling of materials requiring higher flow rates, while the use of steel increases wear resistance, extending the lifespan of the entire hotend.

    Anycubic
    Kobra 3 Max
    0.8 mm
    Stainless Steel
    Description
    Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max The Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max is a practical solution for those who want to get back to printing quickly without the hassle of replacing parts. Thanks to its ready-to-use design with a factory-installed 0.8 mm steel nozzle, you can count on smooth installation and stable operation, which translates to fewer downtimes and more consistent results. The larger nozzle diameter allows for faster printing and better handling of materials requiring higher flow rates, while the use of steel increases wear resistance, extending the lifespan of the entire hotend.   Manufacturer Anycubic Compatibility Kobra 3 Max Diameter 0.8 mm Nozzle Material Stainless Steel
    Nesen skatītās preces
    Informācija
    Klientu serviss
    Mans profils
    Sazinies ar mums
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Mūsu partneri
    Autortiesības © 2026 Tera.lv. Visas tiesības aizsargātas.