Close
Izvēlne
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Menu
    Iepirkumu grozs
    Filters
    Valoda
    Meklēt
    • /
    • Bublue A10 PS pool cleaning robot
    Picture of Bublue A10 PS pool cleaning robot
    Picture of Bublue A10 PS pool cleaning robot
    Picture of Bublue A10 PS pool cleaning robot
    Ražotājs: BUBLUE

    Bublue A10 PS pool cleaning robot


    €140,57 ar pvn

    Artikuls: ST10338312
    Preces kods: A10PS-WH-EU
    Ražotāja mājaslapa
    Garantija: 12 mēneši
    *
    Noliktava Piegāde Daudzums Cena
    PL

    Specifikācija
    ManufacturerModelRated powerOperating timeCharger input voltageCharger output voltageCharger output currentBattery capacityCharging timeSupported pool areaFilter densityWeightCleaning depthWaterproof rating
    Description

    Bublue A10 PS pool cleaning robot

    The Bublue A10 PS is a modern pool cleaning robot designed to remove dirt from the bottom and work near the walls – without the need for manual intervention. Thanks to its high power (33 W), it effectively eliminates sand, leaves, and small debris in just one cycle. It works wirelessly for up to 90 minutes, and fast charging means it is ready for the next cycle after only about 3 hours. The DirtLock™ Tech 2.0 system effectively traps dirt in the filter basket, and intelligent wall detection makes it easier for it to move around. In addition, the self-parking function allows you to conveniently remove the robot after it has finished its work. The whole thing is complemented by LEDs that indicate the status of the device.

    Bluehole Technology™ – effectiveness visible after one cycle

    The high cleaning efficiency is due to the new Bluehole Technology™, which improves the cooperation between the nozzle, motor, and suction impeller. This translates into up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris between 3 and 8 mm in size (compared to the previous generation). As a result, one cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeated operation of the device.

    Smart sensors, autonomous parking, and clear LED signals

    The Bublue A10 PS pool robot has been designed with maximum user convenience in mind, which is why it uses advanced contact sensors that enable quick and precise response to pool walls. The Corner Boost™ technology increases the intensity of cleaning in corners, offering up to twice the effectiveness of removing dirt in these critical areas. When it encounters an edge, the robot automatically corrects its path, moving smoothly and without chaotic bouncing, which translates into smoother and more effective cleaning of the bottom. At the end of the cycle, the device parks itself against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the operating status, charge level, and readiness of the device.

    Double filtration and DirtLock™

    The dual filtration system combines two levels of 80 and 150 mesh screens, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and keeps the water cleaner throughout the entire cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing almost 100% of collected debris from flowing back into the pool. In addition, the optimized basket design provides up to 30% more capacity compared to standard solutions, which means longer operation without the need for frequent emptying.

    Precise component interaction – stable suction power throughout the entire operating cycle

    The Bublue A10 PS features an optimized suction system in which the nozzle, motor, and impeller work in complete synchronization. This design allows for smooth flow of water and debris throughout the entire system, without power loss or sudden drops in performance. The precise alignment of these components translates into stable, effective suction of both small particles and larger debris, regardless of the degree of contamination at the bottom of the pool. The result is consistent robot operation, better energy utilization, and consistently high cleaning efficiency from start to finish.

    Long operating time and fast charging – ready to clean when you need it

    The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, allowing you to thoroughly clean the bottom of the pool in a single cycle. After cleaning, the device recharges in about 3 hours, so it quickly returns to full readiness and does not require long breaks between uses. This combination of operating time and charging time makes the Bublue A10 PS ideal for above-ground pools with a surface area of up to approximately 80 m² and a flat bottom.

    Simple maintenance – cleaning the robot without tools and without effort

    After finishing work, simply rinse the filter and robot housing with a regular garden hose – no need to disassemble the device or use additional accessories. This form of cleaning allows you to easily remove sand, leaves, and small debris.

    Included:

    • Pool cleaning robot
    • Charger
    • Hook for pulling the robot out of the water
    • Handle
    • Brush x2
    • User manual

    Bublue
    A10PS-WH-EU
    33W
    90 minutes
    100-240V
    12.6 V DC
    1.8 A
    4400 mAh
    Approximately 3 hours
    80 m²
    180 μm
    3.5 kg
    3 m
    IPX8
    Description
    Bublue Bubot 300P Pool Cleaning Robot The Bublue Bubot 300P is a modern pool cleaning robot designed to remove debris from the bottom and clean near the walls—without the need for manual intervention. Thanks to its high power (33 W), it effectively removes sand, leaves, and small debris in a single cycle. It operates wirelessly for up to 90 minutes, and fast charging means it’s ready for the next cycle in about 3 hours. The DirtLock™ Tech 2.0 system effectively traps debris in the filter basket, while intelligent wall detection helps it navigate. Additionally, the self-parking feature allows you to conveniently remove the robot once it has finished working. The unit is complemented by LED lights that indicate the device’s status. Bluehole Technology™ – effectiveness visible after a single cycle The new Bluehole Technology™ is responsible for the high cleaning effectiveness, as it optimizes the interaction between the nozzle, motor, and suction impeller. This translates to up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris ranging from 3 to 8 mm in size (compared to the previous generation). As a result, a single cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeatedly restarting the device. Smart sensors, autonomous docking, and clear LED indicators The Bublue Bubot 300P pool robot is designed for maximum user convenience, which is why it uses advanced contact sensors that enable quick and precise responses to pool walls. The Corner Boost™ technology increases cleaning intensity in corners, offering up to twice the dirt removal efficiency in these critical areas. Upon contact with the edge, the robot automatically corrects its path, moving smoothly and without erratic bounces, which results in smoother and more effective cleaning of the pool floor. After completing a cycle, the device autonomously docks against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the device’s operating status, charge level, and readiness. Dual Filtration and DirtLock™ The dual filtration system combines two filter levels with 80- and 150-mesh density, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and helps maintain cleaner water throughout the entire operating cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing nearly 100% of collected debris from flowing back into the pool. Additionally, the optimized basket design provides up to 30% more capacity compared to standard solutions, meaning longer operation without the need for frequent emptying. Precise component coordination – stable suction power throughout the entire operating cycle In the Bublue Bubot 300P model, the optimized suction system plays a key role, with the nozzle, motor, and impeller operating in full synchronization. This design allows for smooth flow of water and debris throughout the system, without power loss or sudden drops in performance. The precise alignment of these components ensures stable, effective suction of both fine particles and larger debris—regardless of how dirty the pool floor is. The result is consistent robot operation, improved energy efficiency, and consistently high cleaning performance from start to finish. Long runtime and fast charging – ready to clean whenever you need it The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, which allows for thorough cleaning of the pool floor in a single cycle. After cleaning, the device charges in about 3 hours, quickly returning to full readiness and requiring no long breaks between uses. This combination of runtime and charging time makes the Bublue Bubot 300P ideal for above-ground pools with an area of up to approximately 80 m² and a flat bottom. Simple maintenance – cleaning the robot without tools and effortlessly After use, simply rinse the filter and the robot’s housing with a standard garden hose – no need to disassemble the device or use additional accessories. This cleaning method easily removes sand, leaves, and small debris. Included in the set: Pool cleaning robot Charger Hook for removing the robot from the water Handle Brush x2 User manual   Manufacturer Bublue Model Bubot 300P Rated power 33W Operating time 90 minutes Charger input voltage 100-240V Charger output voltage 12.6 V DC Charger output current 1.8 A Battery capacity 4400 mAh Charging time approx. 3 hours Supported pool area 80 m² Filter density 180 μm Weight 3.5 kg Cleaning depth 3 m Water resistance rating IPX8

    Specifikācija
    ManufacturerModelRated powerOperating timeCharger input voltageCharger output voltageCharger output currentBattery capacityCharging timeSupported pool areaFilter densityWeightCleaning depthWaterproof rating
    Description

    Bublue A10 PS pool cleaning robot

    The Bublue A10 PS is a modern pool cleaning robot designed to remove dirt from the bottom and work near the walls – without the need for manual intervention. Thanks to its high power (33 W), it effectively eliminates sand, leaves, and small debris in just one cycle. It works wirelessly for up to 90 minutes, and fast charging means it is ready for the next cycle after only about 3 hours. The DirtLock™ Tech 2.0 system effectively traps dirt in the filter basket, and intelligent wall detection makes it easier for it to move around. In addition, the self-parking function allows you to conveniently remove the robot after it has finished its work. The whole thing is complemented by LEDs that indicate the status of the device.

    Bluehole Technology™ – effectiveness visible after one cycle

    The high cleaning efficiency is due to the new Bluehole Technology™, which improves the cooperation between the nozzle, motor, and suction impeller. This translates into up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris between 3 and 8 mm in size (compared to the previous generation). As a result, one cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeated operation of the device.

    Smart sensors, autonomous parking, and clear LED signals

    The Bublue A10 PS pool robot has been designed with maximum user convenience in mind, which is why it uses advanced contact sensors that enable quick and precise response to pool walls. The Corner Boost™ technology increases the intensity of cleaning in corners, offering up to twice the effectiveness of removing dirt in these critical areas. When it encounters an edge, the robot automatically corrects its path, moving smoothly and without chaotic bouncing, which translates into smoother and more effective cleaning of the bottom. At the end of the cycle, the device parks itself against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the operating status, charge level, and readiness of the device.

    Double filtration and DirtLock™

    The dual filtration system combines two levels of 80 and 150 mesh screens, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and keeps the water cleaner throughout the entire cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing almost 100% of collected debris from flowing back into the pool. In addition, the optimized basket design provides up to 30% more capacity compared to standard solutions, which means longer operation without the need for frequent emptying.

    Precise component interaction – stable suction power throughout the entire operating cycle

    The Bublue A10 PS features an optimized suction system in which the nozzle, motor, and impeller work in complete synchronization. This design allows for smooth flow of water and debris throughout the entire system, without power loss or sudden drops in performance. The precise alignment of these components translates into stable, effective suction of both small particles and larger debris, regardless of the degree of contamination at the bottom of the pool. The result is consistent robot operation, better energy utilization, and consistently high cleaning efficiency from start to finish.

    Long operating time and fast charging – ready to clean when you need it

    The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, allowing you to thoroughly clean the bottom of the pool in a single cycle. After cleaning, the device recharges in about 3 hours, so it quickly returns to full readiness and does not require long breaks between uses. This combination of operating time and charging time makes the Bublue A10 PS ideal for above-ground pools with a surface area of up to approximately 80 m² and a flat bottom.

    Simple maintenance – cleaning the robot without tools and without effort

    After finishing work, simply rinse the filter and robot housing with a regular garden hose – no need to disassemble the device or use additional accessories. This form of cleaning allows you to easily remove sand, leaves, and small debris.

    Included:

    • Pool cleaning robot
    • Charger
    • Hook for pulling the robot out of the water
    • Handle
    • Brush x2
    • User manual

    Bublue
    A10PS-WH-EU
    33W
    90 minutes
    100-240V
    12.6 V DC
    1.8 A
    4400 mAh
    Approximately 3 hours
    80 m²
    180 μm
    3.5 kg
    3 m
    IPX8
    Description
    Bublue Bubot 300P Pool Cleaning Robot The Bublue Bubot 300P is a modern pool cleaning robot designed to remove debris from the bottom and clean near the walls—without the need for manual intervention. Thanks to its high power (33 W), it effectively removes sand, leaves, and small debris in a single cycle. It operates wirelessly for up to 90 minutes, and fast charging means it’s ready for the next cycle in about 3 hours. The DirtLock™ Tech 2.0 system effectively traps debris in the filter basket, while intelligent wall detection helps it navigate. Additionally, the self-parking feature allows you to conveniently remove the robot once it has finished working. The unit is complemented by LED lights that indicate the device’s status. Bluehole Technology™ – effectiveness visible after a single cycle The new Bluehole Technology™ is responsible for the high cleaning effectiveness, as it optimizes the interaction between the nozzle, motor, and suction impeller. This translates to up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris ranging from 3 to 8 mm in size (compared to the previous generation). As a result, a single cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeatedly restarting the device. Smart sensors, autonomous docking, and clear LED indicators The Bublue Bubot 300P pool robot is designed for maximum user convenience, which is why it uses advanced contact sensors that enable quick and precise responses to pool walls. The Corner Boost™ technology increases cleaning intensity in corners, offering up to twice the dirt removal efficiency in these critical areas. Upon contact with the edge, the robot automatically corrects its path, moving smoothly and without erratic bounces, which results in smoother and more effective cleaning of the pool floor. After completing a cycle, the device autonomously docks against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the device’s operating status, charge level, and readiness. Dual Filtration and DirtLock™ The dual filtration system combines two filter levels with 80- and 150-mesh density, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and helps maintain cleaner water throughout the entire operating cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing nearly 100% of collected debris from flowing back into the pool. Additionally, the optimized basket design provides up to 30% more capacity compared to standard solutions, meaning longer operation without the need for frequent emptying. Precise component coordination – stable suction power throughout the entire operating cycle In the Bublue Bubot 300P model, the optimized suction system plays a key role, with the nozzle, motor, and impeller operating in full synchronization. This design allows for smooth flow of water and debris throughout the system, without power loss or sudden drops in performance. The precise alignment of these components ensures stable, effective suction of both fine particles and larger debris—regardless of how dirty the pool floor is. The result is consistent robot operation, improved energy efficiency, and consistently high cleaning performance from start to finish. Long runtime and fast charging – ready to clean whenever you need it The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, which allows for thorough cleaning of the pool floor in a single cycle. After cleaning, the device charges in about 3 hours, quickly returning to full readiness and requiring no long breaks between uses. This combination of runtime and charging time makes the Bublue Bubot 300P ideal for above-ground pools with an area of up to approximately 80 m² and a flat bottom. Simple maintenance – cleaning the robot without tools and effortlessly After use, simply rinse the filter and the robot’s housing with a standard garden hose – no need to disassemble the device or use additional accessories. This cleaning method easily removes sand, leaves, and small debris. Included in the set: Pool cleaning robot Charger Hook for removing the robot from the water Handle Brush x2 User manual   Manufacturer Bublue Model Bubot 300P Rated power 33W Operating time 90 minutes Charger input voltage 100-240V Charger output voltage 12.6 V DC Charger output current 1.8 A Battery capacity 4400 mAh Charging time approx. 3 hours Supported pool area 80 m² Filter density 180 μm Weight 3.5 kg Cleaning depth 3 m Water resistance rating IPX8
    Nesen skatītās preces
    Informācija
    Klientu serviss
    Mans profils
    Sazinies ar mums
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Mūsu partneri
    Autortiesības © 2026 Tera.lv. Visas tiesības aizsargātas.