Close
Menu
(0) items
Ваша корзина пуста.
все категории
    Menu
    Корзина
    Filters
    Preferences
    Поиск
    Изображение Elegoo Filament PLA+ ELEGOO (Bkitny)
    Изображение Elegoo Filament PLA+ ELEGOO (Bkitny)
    Изображение Elegoo Filament PLA+ ELEGOO (Bkitny)
    Изображение Elegoo Filament PLA+ ELEGOO (Bkitny)
    Производитель: ELEGOO

    Elegoo Filament PLA+ ELEGOO (Bkitny)


    €18,00 с налогом

    Артикул: ST09572023
    Код производителя: 50.203.0161
    Сайт производителя
    гарантия: 12 месяцы
    *
    Склад Доставка Наличие Цена
    PL
    PL

    Характеристики
    Description

    ELEGOO PLA+ Filament (blue)


    ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.




    Durability and precision


    With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.




    Convenience and compatibility


    The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.







    General




    ManufacturerELEGOOModel50.203.0161ColorBlueWeight1 kg


    Recommended print settings




    Drying settings before printing55 ± 5°CAmbient temperature and humidity≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)Nozzle temperature200 - 230°CTable temperature (depending on printer and surface)35 - 65°CType of working surfaceTextured PEI (polyetherimide - a durable material that holds prints well) or other compatible platesPrinting speedLess than 280 mm/sec


    Physical properties




    Density1.30 g/cm³Melting point161°CDeflection temperature under load56°CSoftening temperature (Vicat test)63°C


    Mechanical properties




    Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest)38 ± 2 MPaElongation at break (XY)7,9% ± 1,6%Bending strength (XY)74 ± 4 MPaBending modulus (XY)2979 ± 156 MPaImpact strength (XY)65.5 ± 3.6 kJ/m²
    Description
    ELEGOO PLA+ Filament (blue) ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament. Durability and precision With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation. Convenience and compatibility The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.   General Manufacturer ELEGOO Model 50.203.0161 Color Blue Weight 1 kg   Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 200 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates Printing speed Less than 280 mm/sec   Physical properties Density 1.30 g/cm³ Melting point 161°C Deflection temperature under load 56°C Softening temperature (Vicat test) 63°C   Mechanical properties Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa Elongation at break (XY) 7,9% ± 1,6% Bending strength (XY) 74 ± 4 MPa Bending modulus (XY) 2979 ± 156 MPa Impact strength (XY) 65.5 ± 3.6 kJ/m²

    Характеристики
    Description

    ELEGOO PLA+ Filament (blue)


    ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.




    Durability and precision


    With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.




    Convenience and compatibility


    The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.







    General




    ManufacturerELEGOOModel50.203.0161ColorBlueWeight1 kg


    Recommended print settings




    Drying settings before printing55 ± 5°CAmbient temperature and humidity≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)Nozzle temperature200 - 230°CTable temperature (depending on printer and surface)35 - 65°CType of working surfaceTextured PEI (polyetherimide - a durable material that holds prints well) or other compatible platesPrinting speedLess than 280 mm/sec


    Physical properties




    Density1.30 g/cm³Melting point161°CDeflection temperature under load56°CSoftening temperature (Vicat test)63°C


    Mechanical properties




    Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest)38 ± 2 MPaElongation at break (XY)7,9% ± 1,6%Bending strength (XY)74 ± 4 MPaBending modulus (XY)2979 ± 156 MPaImpact strength (XY)65.5 ± 3.6 kJ/m²
    Description
    ELEGOO PLA+ Filament (blue) ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament. Durability and precision With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation. Convenience and compatibility The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.   General Manufacturer ELEGOO Model 50.203.0161 Color Blue Weight 1 kg   Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 200 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates Printing speed Less than 280 mm/sec   Physical properties Density 1.30 g/cm³ Melting point 161°C Deflection temperature under load 56°C Softening temperature (Vicat test) 63°C   Mechanical properties Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa Elongation at break (XY) 7,9% ± 1,6% Bending strength (XY) 74 ± 4 MPa Bending modulus (XY) 2979 ± 156 MPa Impact strength (XY) 65.5 ± 3.6 kJ/m²
    Последние
    Информация
    Сервисы
    Личные
    Contact Us
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Наши партнеры
    Copyright © 2026 Tera.lv. Все права защищены.