Close
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Filters
    Valoda
    Meklēt
    Ražotājs: DELOCK

    Delock 3.5″ USB 3.2 Gen 1 Front Panel 1 x USB Type-C™ + 2 x USB Type-A + SD and Micro SD slot


    €82,03 ar pvn

    Artikuls: ST06408129
    Preces kods: 64058
    Ražotāja mājaslapa
    *
    Noliktava Piegāde Daudzums Cena
    LV

    Specifikācija
    Status7 dienas
    Description
    This front panel by Delock can be installed into a free 3.5″ bay of a computer. It has two USB 3.2 Gen 1 Type-A and one USB 3.2 Gen 1 Type-C port. It will be connected to the motherboard internally via a pin header male port.

    Integrated Card Reader
    In addition, the hub with integrated card reader expands the PC by an SD and a Micro SD slot.
    System requirements:
    • Linux Kernel 3.3 or above
    • Windows 8.1/8.1-64/10/10-64
    • PC with one free 3.5″ bay
    • Motherboard with a free 19 pin USB pin header male
    • Power supply with SATA 15 pin receptacle
    Specification:
    • Connectors:
      external:
        1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) USB Type-C™ female
        2 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A female
        1 x SD slot
        1 x Micro SD slot
      internal:
        1 x 19 pin USB pin header female port on the cable
        1 x SATA 15 pin power connector
    • Chipset: VIA VL817, Genesys Logic GL3224
    • Data transfer rate up to:
      SuperSpeed 5 Gbps,
      Hi-Speed 480 Mbps,
      Full-Speed 12 Mbps,
      Low-Speed 1.5 Mbps
    • The Card Reader supports following memory cards:
      1. Slot Secure Digital
      SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, MMC-I,
      MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC, RS-MMC 4.0
      2. Slot Micro Secure Digital
      MicroSD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro
    • Cable data:
      1 x 19 pin USB pin header female cable, length ca. 54 cm (without connectors)
    • 3.5″ metal frame
    • Colour: black
    • Hot Swap, Plug & Play
    Package content:
    • 3.5″ front panel
    • USB pin header female cable
    • Screws
    • User manual
    Data sheet:
    http://www.delock.de/produkt/64058/pdf.html?sprache=en


    Specifikācija
    Status7 dienas
    Description
    This front panel by Delock can be installed into a free 3.5″ bay of a computer. It has two USB 3.2 Gen 1 Type-A and one USB 3.2 Gen 1 Type-C port. It will be connected to the motherboard internally via a pin header male port.

    Integrated Card Reader
    In addition, the hub with integrated card reader expands the PC by an SD and a Micro SD slot.
    System requirements:
    • Linux Kernel 3.3 or above
    • Windows 8.1/8.1-64/10/10-64
    • PC with one free 3.5″ bay
    • Motherboard with a free 19 pin USB pin header male
    • Power supply with SATA 15 pin receptacle
    Specification:
    • Connectors:
      external:
        1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) USB Type-C™ female
        2 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A female
        1 x SD slot
        1 x Micro SD slot
      internal:
        1 x 19 pin USB pin header female port on the cable
        1 x SATA 15 pin power connector
    • Chipset: VIA VL817, Genesys Logic GL3224
    • Data transfer rate up to:
      SuperSpeed 5 Gbps,
      Hi-Speed 480 Mbps,
      Full-Speed 12 Mbps,
      Low-Speed 1.5 Mbps
    • The Card Reader supports following memory cards:
      1. Slot Secure Digital
      SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, MMC-I,
      MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC, RS-MMC 4.0
      2. Slot Micro Secure Digital
      MicroSD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro
    • Cable data:
      1 x 19 pin USB pin header female cable, length ca. 54 cm (without connectors)
    • 3.5″ metal frame
    • Colour: black
    • Hot Swap, Plug & Play
    Package content:
    • 3.5″ front panel
    • USB pin header female cable
    • Screws
    • User manual
    Data sheet:
    http://www.delock.de/produkt/64058/pdf.html?sprache=en