Valoda

Mans Konts

Iepirkumu grozs

Filters

Personal menu

Valoda

Meklēt

Ražotājs: ELEGOO

Filament PLA Bronze ELEGOO

€18,69 ar pvn

Artikuls: ST09593813

Preces kods: 50.203.0465

Ražotāja mājaslapa

Garantija: 12 mēneši

Pieejamība *

	Noliktava	Piegāde	Daudzums	Cena
		3 - 6 dienās	15	€18,69 ar pvn

Daudzums:

Specifikācijas

Specifikācija

ManufacturerModelColorWeight

Recommended print settings

Drying settings before printingAmbient temperature and humidityNozzle temperatureTable temperature (depending on printer and surface)Type of working surfacePrinting speed

Physical properties

DensityMelting pointDeflection temperature under loadSoftening temperature (Vicat test)

Mechanical properties

Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest)Elongation at break (XY)Bending strength (XY)Bending modulus (XY)Impact strength (XY)

Description
Description	PLA Bronze Filament from ELEGOO Bronze-colored filament from ELEGOO with a subtle metallic sheen allows you to create models that look elegant and stylish. This effect works great for figures, props, costume details and decorations where visual depth and a classic finish are important. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints. Stable and clean printing The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jamming. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance. Practical and eco-friendly spools Filament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left. General
ELEGOO
50.203.0465
Brown
1 kg
55 ± 5°C
≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)
190 - 230°C
35 - 65°C
Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface
Less than 300 mm/s
1.26 g/cm³
158°C
57°C
62°C
38 ± 3 MPa
10,5% ± 2,1%
72 ± 5 MPa
2993 ± 182 MPa
66.2 ± 3.9 kJ/m²