Valoda

Mans Konts

Iepirkumu grozs

Filters

Personal menu

Valoda

Meklēt

Ražotājs: ELEGOO

Elegoo Filament PLA Marble ELEGOO

€17,05 ar pvn

Artikuls: ST09565591

Preces kods: 50.203.0113

Ražotāja mājaslapa

Garantija: 12 mēneši

Pieejamība *

Noliktava	Piegāde	Daudzums	Cena
	6 - 12 dienās	276	€17,05 ar pvn
PL	8 - 15 dienās	200	€24,91 ar pvn
PL	8 - 15 dienās	276	€24,94 ar pvn

Daudzums:

Specifikācijas

Specifikācija

Specifikācija 1
Specifikācija 2

Description

PLA Marble Filament by ELEGOO

Marble-colored filament from ELEGOO allows you to create unique models with a realistic stone finish. Thanks to additives that give the surface the characteristic marble effect, the prints gain an aesthetic that is ideal for decorations, figurines or architectural mock-ups. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.

Stable and clean printing

The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jams. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.

Practical and eco-friendly spools

Filament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left.

General

ManufacturerELEGOOModel50.203.0113ColorMarbleWeight1 kg

Recommended print settings

Drying settings before printing55 ± 5°CAmbient temperature and humidity≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)Nozzle temperature190 - 230°CTable temperature (depending on printer and surface)35 - 65°CType of working surfaceTextured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surfacePrinting speedLess than 300 mm/s

Physical properties

Density1.26 g/cm³Melting point158°CDeflection temperature under load57°CSoftening temperature (Vicat test)62°C

Mechanical properties

Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest)38 ± 3 MPaElongation at break (XY)10,5% ± 2,1%Bending strength (XY)72 ± 5 MPaBending modulus (XY)2993 ± 182 MPaImpact strength (XY)66.2 ± 3.9 kJ/m²

Description

PLA Marble Filament by ELEGOO Marble-colored filament from ELEGOO allows you to create unique models with a realistic stone finish. Thanks to additives that give the surface the characteristic marble effect, the prints gain an aesthetic that is ideal for decorations, figurines or architectural mock-ups. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints. Stable and clean printing The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jams. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance. Practical and eco-friendly spools Filament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left. General Manufacturer ELEGOO Model 50.203.0113 Color Marble Weight 1 kg Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 190 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface Printing speed Less than 300 mm/s Physical properties Density 1.26 g/cm³ Melting point 158°C Deflection temperature under load 57°C Softening temperature (Vicat test) 62°C Mechanical properties Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 3 MPa Elongation at break (XY) 10,5% ± 2,1% Bending strength (XY) 72 ± 5 MPa Bending modulus (XY) 2993 ± 182 MPa Impact strength (XY) 66.2 ± 3.9 kJ/m²