Valoda

Mans Konts

Iepirkumu grozs

Filters

Personal menu

Valoda

Meklēt

Ražotājs: FNIRSI

FNIRSI index humidity meter WMT-10 hygrometer

€31,41 ar pvn

Artikuls: ST09790548

Preces kods: WMT-10

Ražotāja mājaslapa

Garantija: 12 mēneši

Pieejamība *

	Noliktava	Piegāde	Daudzums	Cena
		3 - 6 dienās	7	€31,41 ar pvn

Daudzums:

Specifikācijas

Specifikācija

ManufacturerModelDisplayScreen resolutionMaximum detection depthSensor dimensionsWorking temperatureMeasurement rangeMaximum measurement rangeError rangePower source

Description
Description	FNIRSI WMT-10 indicative moisture meter hygrometer The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions. Measurement on any surface - 4 modes of operation The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm. Advanced measurement functions The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time. Durable design and convenient operation The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag. Versatile applications The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial. The set includes moisture meter Type-C cable user manual
FNIRSI
WMT-10
2.4-inch color TFT screen
0.1%
17 mm
40.5 x 40.5 mm
0~40°C
Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75%
0-75%
±1.5%
Lithium rechargeable battery with 1000 mAh capacity

Specifikācija

ManufacturerModelDisplayScreen resolutionMaximum detection depthSensor dimensionsWorking temperatureMeasurement rangeMaximum measurement rangeError rangePower source

Description
Description	FNIRSI WMT-10 indicative moisture meter hygrometer The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions. Measurement on any surface - 4 modes of operation The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm. Advanced measurement functions The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time. Durable design and convenient operation The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag. Versatile applications The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial. The set includes moisture meter Type-C cable user manual
FNIRSI
WMT-10
2.4-inch color TFT screen
0.1%
17 mm
40.5 x 40.5 mm
0~40°C
Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75%
0-75%
±1.5%
Lithium rechargeable battery with 1000 mAh capacity