Close
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Filters
    Valoda
    Meklēt
    Ražotājs: QIDI

    Qidi System wielofilamentowy do Plus 4 (QiDibox)


    €210,65 ar pvn

    Artikuls: ST10812377
    Preces kods: QiDibox
    Ražotāja mājaslapa
    Garantija: 12 mēneši
    *
    Noliktava Piegāde Daudzums Cena
    PL
    PL

    Specifikācija
    Description

    QiDi Box Multi-Filament System for the Plus 4 Series

    The QiDi Box for the Plus 4 Series is a multi-filament system with 4 independent channels, designed for multicolor printing and working with various types of materials. The device supports 1.75 mm diameter filaments, automatic spool switching, drying up to 65°C during printing, temperature and humidity monitoring, and intelligent recognition of QIDI filaments via NFC. A single QIDI Box holds 4 spools, and when the system is expanded to 4 units, you can use up to 16 colors or materials, allowing you to complete more complex projects without frequent manual filament changes.

    Four independent channels and dual gearboxes

    The feed system uses dual gearboxes made of hardened steel and four separate 42-type stepper motors—one for each channel. The design is adapted for both popular filaments and more demanding composite materials reinforced with carbon or glass fiber. The QIDI Box supports, among others, PLA, PETG, ABS, ASA, PET, PA, PC, PVA, and BVOH (after drying), PP, POM, HIPS, TPU 64D, and select CF and GF materials.

    Drying up to 65°C and humidity control

    The QIDI Box allows for simultaneous filament drying and printing, with a maximum drying temperature of 65°C. An airtight storage compartment, combined with the option to use a desiccant, helps minimize the impact of moisture on the filament, which is particularly important for hygroscopic materials. Temperature and humidity are monitored in real time, and their values can be checked on the screen and in the QIDI Studio software.

    Automatic Spool Change and Issue Detection

    The automatic filament refilling feature allows the printer to switch to a spare spool when the currently used material runs out. This feature reduces the risk of unnecessarily interrupting long prints while allowing for more efficient use of remaining material on spools. The system also monitors for filament shortages, tangles, and jams, enabling it to respond appropriately to issues with proper filament feeding.

    NFC and Printing with Support Materials

    NFC support enables automatic recognition of compatible QIDI filaments and adjustment of their settings without the need to manually enter parameters. The QIDI Box’s multi-material design also allows for the use of a separate support filament, including materials designed to be easily snapped off or dissolved, which facilitates the printing of models with more complex geometries. However, for PVA and BVOH, the material must be properly dried before use.

    Compatibility and Safety Precautions

    Not every 1.75 mm filament is compatible with the QIDI Box. Among others, the system does not support TPE, standard TPU, TPU 95A, QIDI PAHT-CF, damp PVA and BVOH, certain Silk filaments (including PLA Silk), and glow-in-the-dark PLA, as well as other materials with excessive stiffness or flexibility. The device is also equipped with a smart PTC fuse and two temperature sensors that monitor operating conditions and automatically cut off the power supply upon detection of an abnormal temperature.

    Included in the set

    • QIDI Box for Plus 4
    • Power cord
    • 8–4-pin signal cable
    • BOX Hub signal cable
    • BOX Hub
    • PTFE tubing, 1000 mm × 5
    • Desiccant packets × 4
    • PTFE tube clamps x 2

     

    ManufacturerQIDIModelBoxCompatibilityPlus 4Device dimensions357 × 300 × 234 mmWeight4.35 kgHousing MaterialABS/PCNumber of Channels4Maximum ExpansionUp to 4 QIDI Box units with compatible accessoriesChannel Indicators4 independent indicator lightsFilament Diameter1.75 mmSupported printing filamentsPLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, TPU 64D, ABS-CF/GF, PLA-CF/GF, PETG-CF/GF, PPS-CF, PET-CF/GFUnsupported filamentsTPE, standard TPU, TPU 95A, QIDI PAHT-CF, moist PVA and BVOH, select Silk materials (including PLA Silk), PLA Glow-in-the-dark, and materials that are excessively stiff or flexibleSupported materials during dryingPLA, ABS, ASA, PA, PC, PET, PETG, PPS, PLA WoodMaximum drying temperature65°CSimultaneous drying and printingyesAirtight filament storageyesTemperature and humidity monitoringyesNFC/RFIDyesFilament monitoringdetection of tangles, jams, and filament shortagesAutomatic switch to a spare spoolYesCompatible spool width50–72 mmCompatible spool diameter195–202 mmPower supply110 V or 220–240 V AC, 50/60 Hz, depending on regional versionMaximum rated power245 W
    Description
    QiDi Box Multi-Filament System for the Plus 4 Series The QiDi Box for the Plus 4 Series is a multi-filament system with 4 independent channels, designed for multicolor printing and working with various types of materials. The device supports 1.75 mm diameter filaments, automatic spool switching, drying up to 65°C during printing, temperature and humidity monitoring, and intelligent recognition of QIDI filaments via NFC. A single QIDI Box holds 4 spools, and when the system is expanded to 4 units, you can use up to 16 colors or materials, allowing you to complete more complex projects without frequent manual filament changes. Four independent channels and dual gearboxes The feed system uses dual gearboxes made of hardened steel and four separate 42-type stepper motors—one for each channel. The design is adapted for both popular filaments and more demanding composite materials reinforced with carbon or glass fiber. The QIDI Box supports, among others, PLA, PETG, ABS, ASA, PET, PA, PC, PVA, and BVOH (after drying), PP, POM, HIPS, TPU 64D, and select CF and GF materials. Drying up to 65°C and humidity control The QIDI Box allows for simultaneous filament drying and printing, with a maximum drying temperature of 65°C. An airtight storage compartment, combined with the option to use a desiccant, helps minimize the impact of moisture on the filament, which is particularly important for hygroscopic materials. Temperature and humidity are monitored in real time, and their values can be checked on the screen and in the QIDI Studio software. Automatic Spool Change and Issue Detection The automatic filament refilling feature allows the printer to switch to a spare spool when the currently used material runs out. This feature reduces the risk of unnecessarily interrupting long prints while allowing for more efficient use of remaining material on spools. The system also monitors for filament shortages, tangles, and jams, enabling it to respond appropriately to issues with proper filament feeding. NFC and Printing with Support Materials NFC support enables automatic recognition of compatible QIDI filaments and adjustment of their settings without the need to manually enter parameters. The QIDI Box’s multi-material design also allows for the use of a separate support filament, including materials designed to be easily snapped off or dissolved, which facilitates the printing of models with more complex geometries. However, for PVA and BVOH, the material must be properly dried before use. Compatibility and Safety Precautions Not every 1.75 mm filament is compatible with the QIDI Box. Among others, the system does not support TPE, standard TPU, TPU 95A, QIDI PAHT-CF, damp PVA and BVOH, certain Silk filaments (including PLA Silk), and glow-in-the-dark PLA, as well as other materials with excessive stiffness or flexibility. The device is also equipped with a smart PTC fuse and two temperature sensors that monitor operating conditions and automatically cut off the power supply upon detection of an abnormal temperature. Included in the set QIDI Box for Plus 4 Power cord 8–4-pin signal cable BOX Hub signal cable BOX Hub PTFE tubing, 1000 mm × 5 Desiccant packets × 4 PTFE tube clamps x 2   Manufacturer QIDI Model Box Compatibility Plus 4 Device dimensions 357 × 300 × 234 mm Weight 4.35 kg Housing Material ABS/PC Number of Channels 4 Maximum Expansion Up to 4 QIDI Box units with compatible accessories Channel Indicators 4 independent indicator lights Filament Diameter 1.75 mm Supported printing filaments PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, TPU 64D, ABS-CF/GF, PLA-CF/GF, PETG-CF/GF, PPS-CF, PET-CF/GF Unsupported filaments TPE, standard TPU, TPU 95A, QIDI PAHT-CF, moist PVA and BVOH, select Silk materials (including PLA Silk), PLA Glow-in-the-dark, and materials that are excessively stiff or flexible Supported materials during drying PLA, ABS, ASA, PA, PC, PET, PETG, PPS, PLA Wood Maximum drying temperature 65°C Simultaneous drying and printing yes Airtight filament storage yes Temperature and humidity monitoring yes NFC/RFID yes Filament monitoring detection of tangles, jams, and filament shortages Automatic switch to a spare spool Yes Compatible spool width 50–72 mm Compatible spool diameter 195–202 mm Power supply 110 V or 220–240 V AC, 50/60 Hz, depending on regional version Maximum rated power 245 W

    Specifikācija
    Description

    QiDi Box Multi-Filament System for the Plus 4 Series

    The QiDi Box for the Plus 4 Series is a multi-filament system with 4 independent channels, designed for multicolor printing and working with various types of materials. The device supports 1.75 mm diameter filaments, automatic spool switching, drying up to 65°C during printing, temperature and humidity monitoring, and intelligent recognition of QIDI filaments via NFC. A single QIDI Box holds 4 spools, and when the system is expanded to 4 units, you can use up to 16 colors or materials, allowing you to complete more complex projects without frequent manual filament changes.

    Four independent channels and dual gearboxes

    The feed system uses dual gearboxes made of hardened steel and four separate 42-type stepper motors—one for each channel. The design is adapted for both popular filaments and more demanding composite materials reinforced with carbon or glass fiber. The QIDI Box supports, among others, PLA, PETG, ABS, ASA, PET, PA, PC, PVA, and BVOH (after drying), PP, POM, HIPS, TPU 64D, and select CF and GF materials.

    Drying up to 65°C and humidity control

    The QIDI Box allows for simultaneous filament drying and printing, with a maximum drying temperature of 65°C. An airtight storage compartment, combined with the option to use a desiccant, helps minimize the impact of moisture on the filament, which is particularly important for hygroscopic materials. Temperature and humidity are monitored in real time, and their values can be checked on the screen and in the QIDI Studio software.

    Automatic Spool Change and Issue Detection

    The automatic filament refilling feature allows the printer to switch to a spare spool when the currently used material runs out. This feature reduces the risk of unnecessarily interrupting long prints while allowing for more efficient use of remaining material on spools. The system also monitors for filament shortages, tangles, and jams, enabling it to respond appropriately to issues with proper filament feeding.

    NFC and Printing with Support Materials

    NFC support enables automatic recognition of compatible QIDI filaments and adjustment of their settings without the need to manually enter parameters. The QIDI Box’s multi-material design also allows for the use of a separate support filament, including materials designed to be easily snapped off or dissolved, which facilitates the printing of models with more complex geometries. However, for PVA and BVOH, the material must be properly dried before use.

    Compatibility and Safety Precautions

    Not every 1.75 mm filament is compatible with the QIDI Box. Among others, the system does not support TPE, standard TPU, TPU 95A, QIDI PAHT-CF, damp PVA and BVOH, certain Silk filaments (including PLA Silk), and glow-in-the-dark PLA, as well as other materials with excessive stiffness or flexibility. The device is also equipped with a smart PTC fuse and two temperature sensors that monitor operating conditions and automatically cut off the power supply upon detection of an abnormal temperature.

    Included in the set

    • QIDI Box for Plus 4
    • Power cord
    • 8–4-pin signal cable
    • BOX Hub signal cable
    • BOX Hub
    • PTFE tubing, 1000 mm × 5
    • Desiccant packets × 4
    • PTFE tube clamps x 2

     

    ManufacturerQIDIModelBoxCompatibilityPlus 4Device dimensions357 × 300 × 234 mmWeight4.35 kgHousing MaterialABS/PCNumber of Channels4Maximum ExpansionUp to 4 QIDI Box units with compatible accessoriesChannel Indicators4 independent indicator lightsFilament Diameter1.75 mmSupported printing filamentsPLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, TPU 64D, ABS-CF/GF, PLA-CF/GF, PETG-CF/GF, PPS-CF, PET-CF/GFUnsupported filamentsTPE, standard TPU, TPU 95A, QIDI PAHT-CF, moist PVA and BVOH, select Silk materials (including PLA Silk), PLA Glow-in-the-dark, and materials that are excessively stiff or flexibleSupported materials during dryingPLA, ABS, ASA, PA, PC, PET, PETG, PPS, PLA WoodMaximum drying temperature65°CSimultaneous drying and printingyesAirtight filament storageyesTemperature and humidity monitoringyesNFC/RFIDyesFilament monitoringdetection of tangles, jams, and filament shortagesAutomatic switch to a spare spoolYesCompatible spool width50–72 mmCompatible spool diameter195–202 mmPower supply110 V or 220–240 V AC, 50/60 Hz, depending on regional versionMaximum rated power245 W
    Description
    QiDi Box Multi-Filament System for the Plus 4 Series The QiDi Box for the Plus 4 Series is a multi-filament system with 4 independent channels, designed for multicolor printing and working with various types of materials. The device supports 1.75 mm diameter filaments, automatic spool switching, drying up to 65°C during printing, temperature and humidity monitoring, and intelligent recognition of QIDI filaments via NFC. A single QIDI Box holds 4 spools, and when the system is expanded to 4 units, you can use up to 16 colors or materials, allowing you to complete more complex projects without frequent manual filament changes. Four independent channels and dual gearboxes The feed system uses dual gearboxes made of hardened steel and four separate 42-type stepper motors—one for each channel. The design is adapted for both popular filaments and more demanding composite materials reinforced with carbon or glass fiber. The QIDI Box supports, among others, PLA, PETG, ABS, ASA, PET, PA, PC, PVA, and BVOH (after drying), PP, POM, HIPS, TPU 64D, and select CF and GF materials. Drying up to 65°C and humidity control The QIDI Box allows for simultaneous filament drying and printing, with a maximum drying temperature of 65°C. An airtight storage compartment, combined with the option to use a desiccant, helps minimize the impact of moisture on the filament, which is particularly important for hygroscopic materials. Temperature and humidity are monitored in real time, and their values can be checked on the screen and in the QIDI Studio software. Automatic Spool Change and Issue Detection The automatic filament refilling feature allows the printer to switch to a spare spool when the currently used material runs out. This feature reduces the risk of unnecessarily interrupting long prints while allowing for more efficient use of remaining material on spools. The system also monitors for filament shortages, tangles, and jams, enabling it to respond appropriately to issues with proper filament feeding. NFC and Printing with Support Materials NFC support enables automatic recognition of compatible QIDI filaments and adjustment of their settings without the need to manually enter parameters. The QIDI Box’s multi-material design also allows for the use of a separate support filament, including materials designed to be easily snapped off or dissolved, which facilitates the printing of models with more complex geometries. However, for PVA and BVOH, the material must be properly dried before use. Compatibility and Safety Precautions Not every 1.75 mm filament is compatible with the QIDI Box. Among others, the system does not support TPE, standard TPU, TPU 95A, QIDI PAHT-CF, damp PVA and BVOH, certain Silk filaments (including PLA Silk), and glow-in-the-dark PLA, as well as other materials with excessive stiffness or flexibility. The device is also equipped with a smart PTC fuse and two temperature sensors that monitor operating conditions and automatically cut off the power supply upon detection of an abnormal temperature. Included in the set QIDI Box for Plus 4 Power cord 8–4-pin signal cable BOX Hub signal cable BOX Hub PTFE tubing, 1000 mm × 5 Desiccant packets × 4 PTFE tube clamps x 2   Manufacturer QIDI Model Box Compatibility Plus 4 Device dimensions 357 × 300 × 234 mm Weight 4.35 kg Housing Material ABS/PC Number of Channels 4 Maximum Expansion Up to 4 QIDI Box units with compatible accessories Channel Indicators 4 independent indicator lights Filament Diameter 1.75 mm Supported printing filaments PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, TPU 64D, ABS-CF/GF, PLA-CF/GF, PETG-CF/GF, PPS-CF, PET-CF/GF Unsupported filaments TPE, standard TPU, TPU 95A, QIDI PAHT-CF, moist PVA and BVOH, select Silk materials (including PLA Silk), PLA Glow-in-the-dark, and materials that are excessively stiff or flexible Supported materials during drying PLA, ABS, ASA, PA, PC, PET, PETG, PPS, PLA Wood Maximum drying temperature 65°C Simultaneous drying and printing yes Airtight filament storage yes Temperature and humidity monitoring yes NFC/RFID yes Filament monitoring detection of tangles, jams, and filament shortages Automatic switch to a spare spool Yes Compatible spool width 50–72 mm Compatible spool diameter 195–202 mm Power supply 110 V or 220–240 V AC, 50/60 Hz, depending on regional version Maximum rated power 245 W