Close
Menu
(0) items
Ваша корзина пуста.
все категории
    Menu
    Корзина
    Filters
    Preferences
    Поиск
    Производитель: SUNLU

    Sunlu SP2 Filament Dryer


    €95,59 с налогом

    Артикул: ST10473602
    Код производителя: FDSP2
    Сайт производителя
    гарантия: 12 месяцы
    *
    Склад Доставка Наличие Цена
    PL

    Характеристики
    ManufacturerModelProduct dimensionsInternal dimensionsNet weightGross weightOperating conditionsOperating relative humidityCompatible filament diametersMaximum spool sizeSupported spool weightExample spool configurationOperating temperature rangeSupported materialsHumidity display rangeOperating time rangePower supplyMaximum operating powerStandby powerPTC heating powerHygrometerStackableRecommended maximum layersSilicone seal
    Description

    Sunlu SP2 filament dryer

    The Sunlu SP2 is a modular 2-in-1 filament dryer that combines effective drying with airtight storage for 3D printing materials. The design consists of a heating base and a storage container, allowing the device to be used flexibly depending on your needs. The containers themselves can be stacked on top of each other to better utilize your workspace. This is a practical solution for those who want to improve filament storage conditions while simplifying daily material handling.

    Drying and storage in a single system

    The SP2 model is designed so that the drying process does not need to be separated from storage. The efficient heating base removes moisture, while the airtight container helps keep the filament in optimal condition even after drying is complete. The top and bottom silicone lids provide excellent sealing and thermal insulation. In storage mode, the device can maintain an internal humidity level of approximately 25% at an average ambient humidity of about 50%.

    Airtight design and humidity control

    The device is equipped with a carrying handle and a recess in the bottom, making it easy to move and position comfortably. A built-in hygrometer allows for real-time monitoring of internal humidity, while three cable ports on each side enable better adaptation to various printing configurations. The modular design simplifies workspace organization, and the ability to stack containers helps save space in both small workshops and larger studios.

    Large capacity and wide compatibility

    The Sunlu SP2 supports spools weighing from 0.25 kg to 3 kg and works with filaments of 1.75 mm and 2.85 mm diameter. The chamber can hold two 1 kg spools, one 2 kg spool, or one 3 kg spool, with a maximum spool size of 250 mm in diameter and 153 mm in width. After attaching the guide roller, it is also possible to use a paper spool, and the spool holder allows for the stable mounting of damaged spools as well.

    Adjustable temperature and improved printing performance

    The SP2 operates within a temperature range of 35°C to 70°C, making it compatible with most popular filaments, such as PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, and PA/PC. Removing moisture from the material helps minimize printing issues such as stringing, nozzle clogging, and poor layer adhesion. The manufacturer provides recommended drying settings for various materials, making it easy to select the appropriate parameters for each filament type.

    Safe and refined operation

    The SP2 model utilizes a 200 W PTC heater supported by a fan, an additional overheat protection switch, and intelligent temperature control via software. This triple safety design enhances the reliability of the heating process and allows for greater peace of mind when using the device. The maximum operating power is 250 W, and power consumption in standby mode does not exceed 1 W, making it highly efficient for everyday use.

    Included

    • Heating base
    • Storage container
    • Hygrometer
    • Desiccant
    • Desiccant container
    • Power cord
    • Reel
    • Air valves
    • PTFE tubes
    • User manual

    Specifications

    Sunlu
    SP2
    278 × 208 × 396 mm
    265 × 193 × 274 mm
    3.6 kg
    4.1 kg
    10°C–35°C
    ≤95%
    1.75 mm, 2.85 mm
    250 × 153 mm
    0.25–3 kg
    2 × 1 kg, 1 × 2 kg, 1 × 3 kg
    35°C–70°C
    PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC
    10%–90%
    0–99 h
    AC 110V / 220V
    250 W
    ≤1 W
    200 W
    Yes
    Yes
    3
    Yes
    Description
    Sunlu SP2 filament dryer The Sunlu SP2 is a modular 2-in-1 filament dryer that combines effective drying with airtight storage for 3D printing materials. The design consists of a heating base and a storage container, allowing the device to be used flexibly depending on your needs. The containers themselves can be stacked on top of each other to better utilize your workspace. This is a practical solution for those who want to improve filament storage conditions while simplifying daily material handling. Drying and storage in a single system The SP2 model is designed so that the drying process does not need to be separated from storage. The efficient heating base removes moisture, while the airtight container helps keep the filament in optimal condition even after drying is complete. The top and bottom silicone lids provide excellent sealing and thermal insulation. In storage mode, the device can maintain an internal humidity level of approximately 25% at an average ambient humidity of about 50%. Airtight design and humidity control The device is equipped with a carrying handle and a recess in the bottom, making it easy to move and position comfortably. A built-in hygrometer allows for real-time monitoring of internal humidity, while three cable ports on each side enable better adaptation to various printing configurations. The modular design simplifies workspace organization, and the ability to stack containers helps save space in both small workshops and larger studios. Large capacity and wide compatibility The Sunlu SP2 supports spools weighing from 0.25 kg to 3 kg and works with filaments of 1.75 mm and 2.85 mm diameter. The chamber can hold two 1 kg spools, one 2 kg spool, or one 3 kg spool, with a maximum spool size of 250 mm in diameter and 153 mm in width. After attaching the guide roller, it is also possible to use a paper spool, and the spool holder allows for the stable mounting of damaged spools as well. Adjustable temperature and improved printing performance The SP2 operates within a temperature range of 35°C to 70°C, making it compatible with most popular filaments, such as PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, and PA/PC. Removing moisture from the material helps minimize printing issues such as stringing, nozzle clogging, and poor layer adhesion. The manufacturer provides recommended drying settings for various materials, making it easy to select the appropriate parameters for each filament type. Safe and refined operation The SP2 model utilizes a 200 W PTC heater supported by a fan, an additional overheat protection switch, and intelligent temperature control via software. This triple safety design enhances the reliability of the heating process and allows for greater peace of mind when using the device. The maximum operating power is 250 W, and power consumption in standby mode does not exceed 1 W, making it highly efficient for everyday use. Included Heating base Storage container Hygrometer Desiccant Desiccant container Power cord Reel Air valves PTFE tubes User manual Specifications Manufacturer Sunlu Model SP2 Product dimensions 278 × 208 × 396 mm Internal dimensions 265 × 193 × 274 mm Net weight 3.6 kg Gross weight 4.1 kg Operating conditions 10°C–35°C Operating relative humidity ≤95% Compatible filament diameters 1.75 mm, 2.85 mm Maximum spool size 250 × 153 mm Supported spool weight 0.25–3 kg Example spool configuration 2 × 1 kg, 1 × 2 kg, 1 × 3 kg Operating temperature range 35°C–70°C Supported materials PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC Humidity display range 10%–90% Operating time range 0–99 h Power supply AC 110V / 220V Maximum operating power 250 W Standby power ≤1 W PTC heating power 200 W Hygrometer Yes Stackable Yes Recommended maximum layers 3 Silicone seal Yes

    Характеристики
    ManufacturerModelProduct dimensionsInternal dimensionsNet weightGross weightOperating conditionsOperating relative humidityCompatible filament diametersMaximum spool sizeSupported spool weightExample spool configurationOperating temperature rangeSupported materialsHumidity display rangeOperating time rangePower supplyMaximum operating powerStandby powerPTC heating powerHygrometerStackableRecommended maximum layersSilicone seal
    Description

    Sunlu SP2 filament dryer

    The Sunlu SP2 is a modular 2-in-1 filament dryer that combines effective drying with airtight storage for 3D printing materials. The design consists of a heating base and a storage container, allowing the device to be used flexibly depending on your needs. The containers themselves can be stacked on top of each other to better utilize your workspace. This is a practical solution for those who want to improve filament storage conditions while simplifying daily material handling.

    Drying and storage in a single system

    The SP2 model is designed so that the drying process does not need to be separated from storage. The efficient heating base removes moisture, while the airtight container helps keep the filament in optimal condition even after drying is complete. The top and bottom silicone lids provide excellent sealing and thermal insulation. In storage mode, the device can maintain an internal humidity level of approximately 25% at an average ambient humidity of about 50%.

    Airtight design and humidity control

    The device is equipped with a carrying handle and a recess in the bottom, making it easy to move and position comfortably. A built-in hygrometer allows for real-time monitoring of internal humidity, while three cable ports on each side enable better adaptation to various printing configurations. The modular design simplifies workspace organization, and the ability to stack containers helps save space in both small workshops and larger studios.

    Large capacity and wide compatibility

    The Sunlu SP2 supports spools weighing from 0.25 kg to 3 kg and works with filaments of 1.75 mm and 2.85 mm diameter. The chamber can hold two 1 kg spools, one 2 kg spool, or one 3 kg spool, with a maximum spool size of 250 mm in diameter and 153 mm in width. After attaching the guide roller, it is also possible to use a paper spool, and the spool holder allows for the stable mounting of damaged spools as well.

    Adjustable temperature and improved printing performance

    The SP2 operates within a temperature range of 35°C to 70°C, making it compatible with most popular filaments, such as PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, and PA/PC. Removing moisture from the material helps minimize printing issues such as stringing, nozzle clogging, and poor layer adhesion. The manufacturer provides recommended drying settings for various materials, making it easy to select the appropriate parameters for each filament type.

    Safe and refined operation

    The SP2 model utilizes a 200 W PTC heater supported by a fan, an additional overheat protection switch, and intelligent temperature control via software. This triple safety design enhances the reliability of the heating process and allows for greater peace of mind when using the device. The maximum operating power is 250 W, and power consumption in standby mode does not exceed 1 W, making it highly efficient for everyday use.

    Included

    • Heating base
    • Storage container
    • Hygrometer
    • Desiccant
    • Desiccant container
    • Power cord
    • Reel
    • Air valves
    • PTFE tubes
    • User manual

    Specifications

    Sunlu
    SP2
    278 × 208 × 396 mm
    265 × 193 × 274 mm
    3.6 kg
    4.1 kg
    10°C–35°C
    ≤95%
    1.75 mm, 2.85 mm
    250 × 153 mm
    0.25–3 kg
    2 × 1 kg, 1 × 2 kg, 1 × 3 kg
    35°C–70°C
    PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC
    10%–90%
    0–99 h
    AC 110V / 220V
    250 W
    ≤1 W
    200 W
    Yes
    Yes
    3
    Yes
    Description
    Sunlu SP2 filament dryer The Sunlu SP2 is a modular 2-in-1 filament dryer that combines effective drying with airtight storage for 3D printing materials. The design consists of a heating base and a storage container, allowing the device to be used flexibly depending on your needs. The containers themselves can be stacked on top of each other to better utilize your workspace. This is a practical solution for those who want to improve filament storage conditions while simplifying daily material handling. Drying and storage in a single system The SP2 model is designed so that the drying process does not need to be separated from storage. The efficient heating base removes moisture, while the airtight container helps keep the filament in optimal condition even after drying is complete. The top and bottom silicone lids provide excellent sealing and thermal insulation. In storage mode, the device can maintain an internal humidity level of approximately 25% at an average ambient humidity of about 50%. Airtight design and humidity control The device is equipped with a carrying handle and a recess in the bottom, making it easy to move and position comfortably. A built-in hygrometer allows for real-time monitoring of internal humidity, while three cable ports on each side enable better adaptation to various printing configurations. The modular design simplifies workspace organization, and the ability to stack containers helps save space in both small workshops and larger studios. Large capacity and wide compatibility The Sunlu SP2 supports spools weighing from 0.25 kg to 3 kg and works with filaments of 1.75 mm and 2.85 mm diameter. The chamber can hold two 1 kg spools, one 2 kg spool, or one 3 kg spool, with a maximum spool size of 250 mm in diameter and 153 mm in width. After attaching the guide roller, it is also possible to use a paper spool, and the spool holder allows for the stable mounting of damaged spools as well. Adjustable temperature and improved printing performance The SP2 operates within a temperature range of 35°C to 70°C, making it compatible with most popular filaments, such as PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, and PA/PC. Removing moisture from the material helps minimize printing issues such as stringing, nozzle clogging, and poor layer adhesion. The manufacturer provides recommended drying settings for various materials, making it easy to select the appropriate parameters for each filament type. Safe and refined operation The SP2 model utilizes a 200 W PTC heater supported by a fan, an additional overheat protection switch, and intelligent temperature control via software. This triple safety design enhances the reliability of the heating process and allows for greater peace of mind when using the device. The maximum operating power is 250 W, and power consumption in standby mode does not exceed 1 W, making it highly efficient for everyday use. Included Heating base Storage container Hygrometer Desiccant Desiccant container Power cord Reel Air valves PTFE tubes User manual Specifications Manufacturer Sunlu Model SP2 Product dimensions 278 × 208 × 396 mm Internal dimensions 265 × 193 × 274 mm Net weight 3.6 kg Gross weight 4.1 kg Operating conditions 10°C–35°C Operating relative humidity ≤95% Compatible filament diameters 1.75 mm, 2.85 mm Maximum spool size 250 × 153 mm Supported spool weight 0.25–3 kg Example spool configuration 2 × 1 kg, 1 × 2 kg, 1 × 3 kg Operating temperature range 35°C–70°C Supported materials PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC Humidity display range 10%–90% Operating time range 0–99 h Power supply AC 110V / 220V Maximum operating power 250 W Standby power ≤1 W PTC heating power 200 W Hygrometer Yes Stackable Yes Recommended maximum layers 3 Silicone seal Yes
    Последние
    Информация
    Сервисы
    Личные
    Contact Us
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Наши партнеры
    Copyright © 2026 Tera.lv. Все права защищены.