Close
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Filters
    Valoda
    Meklēt
    Ražotājs: DELOCK

    Delock 3.5″ Mobile Rack for 1 x 2.5″ U.2 NVMe SSD or SATA / SAS HDD / SSD


    €128,77 ar pvn

    Artikuls: ST05160406
    Preces kods: 47232
    Ražotāja mājaslapa
    *
    Noliktava Piegāde Daudzums Cena
    LV

    Specifikācija
    Status7 dienas
    Description
    This solid metal mobile rack by Delock can be installed into a free 3.5″ bay of a PC.

    U.2 SFF-8639 interface also suitable for SATA and SAS
    A 2.5″ U.2 SSD can be mounted in the tray and slid into the rack.
    A SATA or SAS HDD or SSD can also be installed. Depending on which memory type is installed, the appropriate cable must be connected to the backside and connected to the system. This is possible because the SFF-8639 port allows the connection of a SAS 29 pin or SATA cable.
    The hot swap function allows the exchange of the hard disk drive during operation.

    Tray with key lock
    The mobile rack is equipped with a key lock to prevent unauthorised access.
    System requirements:
    • Linux Kernel 3.19 or above
    • Windows 7/7-64/8.1/8.1-64/10/10-64
    • PC with one free 3.5″ bay
    • A free U.2 port or
    • A free SATA / SAS port
    Specification:
    • Connectors:
      internal:
      1 x U.2 SFF-8639 female
      external:
      1 x U.2 SFF-8639 male
    • Suitable for 2.5″ U.2 / SATA / SAS HDD / SSD:
      HDD height up to 15 mm
      supports 5 V SATA / SAS HDD / SSD
      supports 12 V SAS HDD / SSD
    • Data transfer rate:
      SATA up to 6 Gb/s
      SAS up to 12 Gb/s
      NVMe up to 32 Gb/s
    • 1 x On / Off switch
    • Key lock
    • Hot Swap
    Package content:
    • 3.5″ mobile rack
    • 2.5″ mobile rack inner tray
    • 2 x keys
    • 6 x rack screws
    • 4 x hard drive screws
    • User manual
    Data sheet:
    http://www.delock.de/produkt/47232/pdf.html?sprache=en


    Specifikācija
    Status7 dienas
    Description
    This solid metal mobile rack by Delock can be installed into a free 3.5″ bay of a PC.

    U.2 SFF-8639 interface also suitable for SATA and SAS
    A 2.5″ U.2 SSD can be mounted in the tray and slid into the rack.
    A SATA or SAS HDD or SSD can also be installed. Depending on which memory type is installed, the appropriate cable must be connected to the backside and connected to the system. This is possible because the SFF-8639 port allows the connection of a SAS 29 pin or SATA cable.
    The hot swap function allows the exchange of the hard disk drive during operation.

    Tray with key lock
    The mobile rack is equipped with a key lock to prevent unauthorised access.
    System requirements:
    • Linux Kernel 3.19 or above
    • Windows 7/7-64/8.1/8.1-64/10/10-64
    • PC with one free 3.5″ bay
    • A free U.2 port or
    • A free SATA / SAS port
    Specification:
    • Connectors:
      internal:
      1 x U.2 SFF-8639 female
      external:
      1 x U.2 SFF-8639 male
    • Suitable for 2.5″ U.2 / SATA / SAS HDD / SSD:
      HDD height up to 15 mm
      supports 5 V SATA / SAS HDD / SSD
      supports 12 V SAS HDD / SSD
    • Data transfer rate:
      SATA up to 6 Gb/s
      SAS up to 12 Gb/s
      NVMe up to 32 Gb/s
    • 1 x On / Off switch
    • Key lock
    • Hot Swap
    Package content:
    • 3.5″ mobile rack
    • 2.5″ mobile rack inner tray
    • 2 x keys
    • 6 x rack screws
    • 4 x hard drive screws
    • User manual
    Data sheet:
    http://www.delock.de/produkt/47232/pdf.html?sprache=en