Close
Izvēlne
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Menu
    Iepirkumu grozs
    Filters
    Valoda
    Meklēt
    Iepriekšējais produkts2 x RCA - 2 x RCA kabelis a...
    Nākamais produkts2.5 Konverter SATA Express ...
    Ražotājs: DELOCK

    2.5 HDD SSD Extension Frame


    €8,57 ar pvn

    Artikuls: ST02813538
    Preces kods: 18216
    Ražotāja mājaslapa
    *
    Noliktava Piegāde Daudzums Cena
    LV

    Specifikācija
    Krāsa Melna
    Status7 dienas
    Description
    Description:
    This extension frame by Delock can be sticked onto a HDD / SSD hard drive to adjust the installation height. Therefore the hard disk can be adjusted to a different installation height, so that it can be installed in an external enclosure or a mobile rack, if it is required. The frame can be used together with an SSD that has an installation height of 7 mm. Thus it can be used in mobile racks that require an installation height of 9.5 mm. This ensures that the SSD can be inserted correctly in the mobile rack. Otherwise there can be problems with the mechanism of the mobile rack.

    Specification:
    • Suitable for 2.5″ HDDs / SSDs
    • Height changing e.g.:
    from 7 mm to ca. 9,5 mm
    from 9,5 mm to ca. 12 mm
    from 12,5 mm to ca. 15 mm
    • 3M adhesive pad on the buttom
    • Dimensions (LxWxH): ca. 99.55 x 69.45 x 2.40 mm
    • Material: plastic
    • Colour: black

    System requirements:


    Package content:
    • Extension frame

    Specifikācija
    Krāsa Melna
    Status7 dienas
    Description
    Description:
    This extension frame by Delock can be sticked onto a HDD / SSD hard drive to adjust the installation height. Therefore the hard disk can be adjusted to a different installation height, so that it can be installed in an external enclosure or a mobile rack, if it is required. The frame can be used together with an SSD that has an installation height of 7 mm. Thus it can be used in mobile racks that require an installation height of 9.5 mm. This ensures that the SSD can be inserted correctly in the mobile rack. Otherwise there can be problems with the mechanism of the mobile rack.

    Specification:
    • Suitable for 2.5″ HDDs / SSDs
    • Height changing e.g.:
    from 7 mm to ca. 9,5 mm
    from 9,5 mm to ca. 12 mm
    from 12,5 mm to ca. 15 mm
    • 3M adhesive pad on the buttom
    • Dimensions (LxWxH): ca. 99.55 x 69.45 x 2.40 mm
    • Material: plastic
    • Colour: black

    System requirements:


    Package content:
    • Extension frame
    Nesen skatītās preces
    Informācija
    Klientu serviss
    Mans profils
    Sazinies ar mums
    • Ogre, Mālkalnes prospekts 5-18, LV-5003
    • (+371) 22111444, (+371) 22500002
    Mūsu partneri
    Autortiesības © 2024 Tera.lv. Visas tiesības aizsargātas.