Close
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Filters
    Valoda
    Meklēt
    Ražotājs: DELOCK

    Delock 2.5 Converter SATA 22 Pin 2 x M.2 NGFF with RAID


    €75,78 ar pvn

    Artikuls: ST02819234
    Preces kods: 62590
    Ražotāja mājaslapa
    *
    Noliktava Piegāde Daudzums Cena
    LV

    Specifikācija
    Īpašības SATA cable
    Krāsa Zaļa
    TypeAdapter
    UsageComputer
    Connectors #1SATA 22pin Female
    Connectors #2M.2 NGFF x 2
    ColorNot applicable
    Accessories included
    • Adapter
    • Obudowa na 2,5"
    • Śrubki i inne materiały potrzebne do montażu
    Width115
    Height145
    Depth40
    Weight153
    Description

    Adapter SATA 22Pin -> 2x M.2 NGFF 2.5''

    • Złącza: 1 x SATA 6 Gb/s 22 pin żeńskie, 2 x 67 pin M.2 NGFF key B
    • Interfejs: SATA
    • Chipset: Asmedia ASM1092R
    • Form factor: 2,5"
    • Wspiera moduły M.2 NGFF w fomacie: 2280, 2260, 2242 i 2230
    • Maksymalna wysokość modułów: 1,35 mm (możilwe jest zamontowanie modułów dwustronnych)
    • Wspiera RAID 0, 1, JBOD
    • 2x Wskaźniki LED informujące o pracy SATA (zielone) lub o błędzie kości M.2 (czerwone)
    • Botowalny
    • Prędkość transmisji danych do 6 Gb/s
    • Nie wymaga instalacji sterowników
    • Niezależne od systemu operacyjnego
    Status7 dienas
    Description
    Description:
    This Delock converter enables you to connect up to two M.2 NGFF SSD in 2280, 2260, 2242 or 2230 format which can be used as a 2.5″ HDD. The converter can be installed into your system internally through an SATA 22 pin interface. When using more than one SSD, you have the possibility to use different RAID level.

    Specification:
    • Connector:
    1 x SATA 6 Gb/s 22 pin female
    2 x 67 pin M.2 NGFF key B slot
    • Interface: SATA
    • Chipset: Asmedia ASM1092R
    • Form factor: 2.5″
    • Supports M.2 NGFF modules in format 2280, 2260, 2242 and 2230 with key B
    or key B+M based on SATA
    • Maximum height of the components on the module: 1.35 mm
    application of double-sided assembled modules supported
    • Supports RAID 0, 1, JBOD
    • RAID mode set by DIP switch on board
    • 2 x LED for SATA host activity (green) and M.2 SSD error (red)
    • Bootable
    • Data transfer rate up to 6 Gb/s
    • OS independent, no driver installation necessary

    System requirements:
    • A free SATA 22 pin interface

    Package content:
    • Converter
    • 2.5″ enclosure
    • Mounting material

    Specifikācija
    Īpašības SATA cable
    Krāsa Zaļa
    TypeAdapter
    UsageComputer
    Connectors #1SATA 22pin Female
    Connectors #2M.2 NGFF x 2
    ColorNot applicable
    Accessories included
    • Adapter
    • Obudowa na 2,5"
    • Śrubki i inne materiały potrzebne do montażu
    Width115
    Height145
    Depth40
    Weight153
    Description

    Adapter SATA 22Pin -> 2x M.2 NGFF 2.5''

    • Złącza: 1 x SATA 6 Gb/s 22 pin żeńskie, 2 x 67 pin M.2 NGFF key B
    • Interfejs: SATA
    • Chipset: Asmedia ASM1092R
    • Form factor: 2,5"
    • Wspiera moduły M.2 NGFF w fomacie: 2280, 2260, 2242 i 2230
    • Maksymalna wysokość modułów: 1,35 mm (możilwe jest zamontowanie modułów dwustronnych)
    • Wspiera RAID 0, 1, JBOD
    • 2x Wskaźniki LED informujące o pracy SATA (zielone) lub o błędzie kości M.2 (czerwone)
    • Botowalny
    • Prędkość transmisji danych do 6 Gb/s
    • Nie wymaga instalacji sterowników
    • Niezależne od systemu operacyjnego
    Status7 dienas
    Description
    Description:
    This Delock converter enables you to connect up to two M.2 NGFF SSD in 2280, 2260, 2242 or 2230 format which can be used as a 2.5″ HDD. The converter can be installed into your system internally through an SATA 22 pin interface. When using more than one SSD, you have the possibility to use different RAID level.

    Specification:
    • Connector:
    1 x SATA 6 Gb/s 22 pin female
    2 x 67 pin M.2 NGFF key B slot
    • Interface: SATA
    • Chipset: Asmedia ASM1092R
    • Form factor: 2.5″
    • Supports M.2 NGFF modules in format 2280, 2260, 2242 and 2230 with key B
    or key B+M based on SATA
    • Maximum height of the components on the module: 1.35 mm
    application of double-sided assembled modules supported
    • Supports RAID 0, 1, JBOD
    • RAID mode set by DIP switch on board
    • 2 x LED for SATA host activity (green) and M.2 SSD error (red)
    • Bootable
    • Data transfer rate up to 6 Gb/s
    • OS independent, no driver installation necessary

    System requirements:
    • A free SATA 22 pin interface

    Package content:
    • Converter
    • 2.5″ enclosure
    • Mounting material